chore(idf): update to esp-idf 5.5.3

AGENTS.md

@@ -25,15 +25,23 @@
 8. Blocking APIs must define timeout and idempotent semantics (no destructive background continuation after caller timeout).
 
 ## Build, Flash, and Validation
-Activate ESP-IDF v5.5.2 before running any `idf.py` command:
+Activate ESP-IDF v5.5.3 before running any `idf.py` command:
 ```bash
 export PATH=/opt/homebrew/bin:$PATH
-export IDF_PATH=/Users/moyyang/esp/v5.5.2/esp-idf
+export IDF_PATH=/Users/moyyang/.espressif/v5.5.3/esp-idf
 source $IDF_PATH/export.sh
 ```
 - `idf.py set-target esp32s3`: one-time target setup.
-- `idf.py build`: compile and validate.
-- `idf.py -p <PORT> flash monitor`: flash and open serial monitor (`Ctrl+]` to exit).
+- `idf.py build`: compile and validate; generated flash maps and binaries stay under `build/`.
+- Secured/provisioned boards with Secure Boot and Flash Encryption enabled must use encrypted app-only flashing:
+```bash
+idf.py -p <PORT> encrypted-app-flash
+idf.py -p <PORT> monitor
+```
+  This updates only the encrypted app partition at `0x30000` via `build/encrypted_app-flash_args`; it must not rewrite the bootloader, partition table, or OTA data on secured boards.
+- Do not use `idf.py flash` on secured boards. It attempts to write low flash regions such as the bootloader at `0x0`, which Secure Boot blocks to protect the device.
+- Do not use plain `idf.py app-flash` on Flash Encryption boards. It writes a plaintext app image and can boot-fail with invalid app magic or no bootable app partition.
+- `idf.py -p <PORT> flash monitor` is only for fresh development boards without Secure Boot/Flash Encryption, or for initial factory provisioning handled by `tools/esptool-factory`.
 - `idf.py menuconfig`: adjust project options.
 - `idf.py fullclean && idf.py build`: clear stale artifacts.
 
@@ -46,8 +54,12 @@ source $IDF_PATH/export.sh
 ## Testing Guidelines
 There is no dedicated unit-test directory currently. Minimum validation:
 - Build check: `idf.py build`.
-- Device smoke test after flash: `/v1/health`, printer connect/disconnect, and one print flow (text or image) via `curl`.
-- For Control Plane or REST changes, include one request/response or lifecycle scenario in PR notes.
+- Secured-board flash check: `idf.py -p <PORT> encrypted-app-flash`, then `idf.py -p <PORT> monitor`.
+- Monitor boot logs should show Secure Boot signature verification, app ESP-IDF version, Wi-Fi connection/IP when configured, printer protocol initialization, `MIC_KEY` readiness, control-plane lifecycle start, and `TQ printer runtime started`.
+- If STA connects, confirm host reachability with `ping <DEVICE_IP>`.
+- For unprovisioned devices, validate the SoftAP provisioning flow at `http://192.168.4.1` and the provisioning endpoints `/`, `/scan`, and `/provision`.
+- Physical smoke tests should cover `MIC_KEY` press/release, POWER key long press, and one normal product print flow when the required printer hardware/workflow is available.
+- For Control Plane or protocol changes, include one lifecycle or request/response scenario in PR notes.
 
 ## Commit & Pull Request Guidelines
 Use a clear conventional format:

README.md

@@ -58,13 +58,13 @@
 
 ## 构建环境
 
-本项目按当前实际使用 ESP-IDF `v5.5.2`。
+本项目按当前实际使用 ESP-IDF `v5.5.3`。
 
 先激活环境:
 
 ```bash
 export PATH=/opt/homebrew/bin:$PATH
-export IDF_PATH=/Users/moyyang/esp/v5.5.2/esp-idf
+export IDF_PATH=/Users/moyyang/.espressif/v5.5.3/esp-idf
 source $IDF_PATH/export.sh
 ```
 

dependencies.lock

@@ -80,7 +80,7 @@ dependencies:
   idf:
     source:
       type: idf
-    version: 5.5.2
+    version: 5.5.3
 direct_dependencies:
 - espressif/button
 - espressif/esp_audio_codec

sdkconfig.defaults

@@ -14,8 +14,8 @@ CONFIG_LWIP_TCP_SND_BUF_DEFAULT=57344
 CONFIG_LWIP_TCP_WND_DEFAULT=262144
 CONFIG_LWIP_TCP_RECVMBOX_SIZE=192
 CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=256
-CONFIG_LOG_DEFAULT_LEVEL_WARN=y
-CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y
+CONFIG_LOG_DEFAULT_LEVEL_INFO=y
+CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
 CONFIG_TQ_WIFI_PROV_SOFTAP_SSID="TalkingQ-Setup"
 CONFIG_TQ_WIFI_PROV_SOFTAP_PASSWORD=""
 CONFIG_TQ_WIFI_PROV_SOFTAP_CHANNEL=1