menu "TQ Printer Config"

config TQ_WIFI_PROV_SOFTAP_SSID
    string "Wi-Fi provisioning SoftAP SSID"
    default "TalkingQ-Setup"

config TQ_WIFI_PROV_SOFTAP_PASSWORD
    string "Wi-Fi provisioning SoftAP Password (empty means open AP)"
    default ""

config TQ_WIFI_PROV_SOFTAP_CHANNEL
    int "Wi-Fi provisioning SoftAP channel"
    range 1 13
    default 1

config TQ_WIFI_PROV_SOFTAP_MAX_CONN
    int "Wi-Fi provisioning SoftAP max clients"
    range 1 8
    default 4

config TQ_WIFI_MAXIMUM_RETRY
    int "Wi-Fi Maximum Retry"
    default 10

config TQ_WIFI_CONNECT_TIMEOUT_MS
    int "Wi-Fi connect timeout (ms)"
    range 3000 60000
    default 15000

config TQ_LIFECYCLE_START_RETRY_COUNT
    int "Lifecycle start retry count"
    range 0 5
    default 2

config TQ_LIFECYCLE_RETRY_BACKOFF_MS
    int "Lifecycle retry base backoff (ms)"
    range 100 10000
    default 800

config TQ_PRINTER_CONTROL_LOCK_TIMEOUT_MS
    int "Printer control lane lock timeout (ms)"
    range 100 5000
    default 1000

config TQ_PRINTER_WORKER_QUEUE_WAIT_MS
    int "Printer worker queue poll wait (ms)"
    range 50 2000
    default 250

config TQ_PRINTER_QUEUE_RETRY_DELAY_MS
    int "Printer queue retry delay (ms)"
    range 5 500
    default 20

config TQ_PRINTER_STATUS_POLL_INTERVAL_MS
    int "Printer status poll interval (ms)"
    range 1000 30000
    default 5000

config TQ_PRINTER_STOP_TIMEOUT_MS
    int "Printer protocol stop timeout (ms)"
    range 1000 30000
    default 8000

config TQ_PRINTER_OPERATION_TIMEOUT_MS
    int "Printer max operation timeout (ms)"
    range 1000 300000
    default 90000

config TQ_PRINTER_STROBE_ON_US
    int "Printer strobe on-time (us)"
    range 100 10000
    default 1000

config TQ_PRINTER_STROBE_INTERVAL_US
    int "Printer strobe interval (us)"
    range 0 10000
    default 200

config TQ_PRINTER_MOTOR_STEP_US
    int "Printer motor step delay (us)"
    range 100 20000
    default 2000

config TQ_PRINTER_MOTOR_REVERSE
    bool "Printer motor direction reversed"
    default n

config TQ_PRINTER_STEPS_PER_LINE
    int "Printer motor steps per printed line"
    range 1 8
    default 2

config TQ_PRINTER_GAP_STEPS
    int "Printer gap move steps"
    range 1 2000
    default 96

config TQ_PRINTER_TEMP_MIN_C
    int "Printer allowed minimum temperature (C)"
    range 0 120
    default 15

config TQ_PRINTER_TEMP_MAX_C
    int "Printer allowed maximum temperature (C)"
    range 1 150
    default 55

config TQ_PRINTER_BATTERY_MIN_PERCENT
    int "Printer minimum battery percent"
    range 0 100
    default 5

config TQ_PRINTER_PAPER_PRESENT_LEVEL
    int "Printer paper-present GPIO level (0/1)"
    range 0 1
    default 0

config TQ_PRINTER_BATTERY_EMPTY_MV
    int "Printer battery empty voltage (mV)"
    range 2500 5000
    default 3300

config TQ_PRINTER_BATTERY_FULL_MV
    int "Printer battery full voltage (mV)"
    range 2600 6000
    default 4200

config TQ_PRINTER_BATTERY_DIVIDER_RATIO_X1000
    int "Printer battery divider ratio x1000"
    range 1000 10000
    default 2000

config TQ_PRINTER_NTC_PULLUP_OHMS
    int "Printer NTC pull-up resistor (ohms)"
    range 1000 200000
    default 10000

config TQ_PRINTER_NTC_R25_OHMS
    int "Printer NTC R25 resistance (ohms)"
    range 1000 200000
    default 10000

config TQ_PRINTER_NTC_BETA
    int "Printer NTC beta constant"
    range 1000 10000
    default 3950

config TQ_Z_IMAGE_API_KEY
    string "Z-Image API Key for DashScope HTTP (optional, fallback to Voice API key)"
    default "sk-7a50eca6856d4afb968ac3bf512f6d1b"

config TQ_Z_IMAGE_API_ENDPOINT
    string "Z-Image HTTP endpoint"
    default "https://dashscope.aliyuncs.com/api/v1/services/aigc/multimodal-generation/generation"

config TQ_Z_IMAGE_MODEL
    string "Z-Image model"
    default "z-image-turbo"

config TQ_Z_IMAGE_DEFAULT_SIZE
    string "Z-Image default output size"
    default "512*768"

config TQ_Z_IMAGE_TIMEOUT_MS
    int "Z-Image generation timeout (ms)"
    range 5000 180000
    default 45000

config TQ_Z_IMAGE_DOWNLOAD_TIMEOUT_MS
    int "Z-Image image download timeout (ms)"
    range 2000 120000
    default 15000

config TQ_Z_IMAGE_MAX_RESPONSE_BYTES
    int "Z-Image max response body bytes"
    range 1024 262144
    default 65536

config TQ_Z_IMAGE_MAX_PNG_BYTES
    int "Z-Image max downloaded PNG bytes"
    range 65536 8388608
    default 4194304

config TQ_Z_IMAGE_HTTP_BUFFER_BYTES
    int "Z-Image HTTP client buffer bytes"
    range 4096 32768
    default 16384

config TQ_Z_IMAGE_HTTP_READ_CHUNK_BYTES
    int "Z-Image HTTP stream read chunk bytes"
    range 4096 32768
    default 16384

config TQ_VOICE_API_KEY
    string "Voice API Key for DashScope WebSocket (optional)"
    default "sk-7a50eca6856d4afb968ac3bf512f6d1b"

config TQ_VOICE_WS_URI
    string "Voice WebSocket URI"
    default "wss://dashscope.aliyuncs.com/api-ws/v1/inference"

config TQ_VOICE_WORKSPACE_ID
    string "Voice workspace_id"
    default "llm-igyrxzdvbwja5gyt"

config TQ_VOICE_APP_ID
    string "Voice app_id"
    default "106a67b690db4686a5d6b40d119653fa"

config TQ_VOICE_USER_ID
    string "Voice client user_id"
    default "esp32-user"

config TQ_VOICE_DEVICE_UUID
    string "Voice client device uuid (optional)"
    default ""

config TQ_VOICE_TTS_VOICE
    string "Voice TTS voice (optional)"
    default "longling_v3"

config TQ_VOICE_SAMPLE_RATE
    int "Voice sample rate"
    range 8000 48000
    default 16000

config TQ_VOICE_OPUS_FRAME_MS
    int "Voice raw-opus frame size (ms)"
    range 10 120
    default 100

config TQ_VOICE_OPUS_BITRATE_KBPS
    int "Voice raw-opus bitrate (kbps)"
    range 6 128
    default 32

config TQ_VOICE_HEARTBEAT_SEC
    int "Voice heartbeat interval seconds"
    range 10 55
    default 50

config TQ_VOICE_I2C_PORT
    int "Voice I2C port"
    range 0 1
    default 1

config TQ_VOICE_I2C_SDA_PIN
    int "Voice I2C SDA GPIO"
    range 0 48
    default 6

config TQ_VOICE_I2C_SCL_PIN
    int "Voice I2C SCL GPIO"
    range 0 48
    default 7

config TQ_VOICE_CODEC_ADDR
    int "ES8311 I2C address"
    range 1 126
    default 48

config TQ_VOICE_I2S_PORT
    int "Voice I2S port"
    range 0 1
    default 0

config TQ_VOICE_I2S_MCLK_PIN
    int "Voice I2S MCLK GPIO"
    range -1 48
    default 38

config TQ_VOICE_I2S_BCLK_PIN
    int "Voice I2S BCLK GPIO"
    range 0 48
    default 39

config TQ_VOICE_I2S_WS_PIN
    int "Voice I2S WS GPIO"
    range 0 48
    default 41

config TQ_VOICE_I2S_DOUT_PIN
    int "Voice I2S DOUT GPIO"
    range 0 48
    default 42

config TQ_VOICE_I2S_DIN_PIN
    int "Voice I2S DIN GPIO"
    range 0 48
    default 40

config TQ_VOICE_CODEC_PA_PIN
    int "ES8311 PA control GPIO"
    range -1 48
    default 20

menu "Board GPIO Mapping (ESP32-S3)"

config TQ_POWER_HOLD_PIN
    int "Power hold GPIO (drive high to keep power)"
    range -1 48
    default 1

config TQ_POWER_KEY_PIN
    int "Power key GPIO"
    range -1 48
    default 47

config TQ_LED_R_PIN
    int "LED_R GPIO"
    range -1 48
    default 2

config TQ_LED_G_PIN
    int "LED_G GPIO"
    range -1 48
    default 21

config TQ_KEY_PRINT_PIN
    int "Print confirm key / 7.2V boost control GPIO"
    range -1 48
    default 0

config TQ_KEY_PRINT_BOOST_ENABLE_ON_BOOT
    bool "Use KEY_PRINT pin as 7.2V boost enable on boot"
    default y

config TQ_KEY_PRINT_BOOST_ACTIVE_HIGH
    bool "KEY_PRINT boost enable level is high"
    default y
    depends on TQ_KEY_PRINT_BOOST_ENABLE_ON_BOOT

config TQ_MIC_KEY_PIN
    int "Mic key GPIO"
    range -1 48
    default 14

config TQ_BATTERY_ADC_PIN
    int "Battery ADC detect GPIO"
    range -1 48
    default 15

config TQ_NTC_ADC_PIN
    int "NTC ADC GPIO"
    range -1 48
    default 18

config TQ_PRINT_STB_56_PIN
    int "Printer STB5_6 GPIO"
    range -1 48
    default 4

config TQ_PRINT_STB_34_PIN
    int "Printer STB3_4 GPIO"
    range -1 48
    default 5

config TQ_PRINT_STB_12_PIN
    int "Printer STB1_2 GPIO"
    range -1 48
    default 16

config TQ_PRINT_PAPER_PIN
    int "Printer paper detect GPIO"
    range -1 48
    default 17

config TQ_PRINT_OUTA_P_PIN
    int "Printer OUTA+ GPIO"
    range -1 48
    default 8

config TQ_PRINT_OUTA_N_PIN
    int "Printer OUTA- GPIO"
    range -1 48
    default 19

config TQ_PRINT_OUTB_P_PIN
    int "Printer OUTB+ GPIO"
    range -1 48
    default 3

config TQ_PRINT_OUTB_N_PIN
    int "Printer OUTB- GPIO"
    range -1 48
    default 46

config TQ_PRINT_LAT_PIN
    int "Printer LAT GPIO"
    range -1 48
    default 45

config TQ_SPI_SHARED_MOSI_PIN
    int "Printer/Screen shared MOSI GPIO"
    range -1 48
    default 9

config TQ_PRINTER_MISO_PIN
    int "Printer MISO GPIO"
    range -1 48
    default 10

config TQ_SPI_SHARED_CLK_PIN
    int "Printer/Screen shared CLK GPIO"
    range -1 48
    default 11

config TQ_SCREEN_DC_PIN
    int "Screen DC GPIO"
    range -1 48
    default 12

config TQ_SCREEN_CS_PIN
    int "Screen CS GPIO"
    range -1 48
    default 13

config TQ_SCREEN_BACKLIGHT_PIN
    int "Screen backlight GPIO (active high)"
    range -1 48
    default 48

endmenu

menu "ST7789 Screen"

config TQ_SCREEN_ENABLE
    bool "Enable ST7789 screen driver"
    default y
    depends on SOC_GPSPI_SUPPORTED

config TQ_SCREEN_PIXEL_CLOCK_HZ
    int "ST7789 SPI pixel clock (Hz)"
    range 1000000 80000000
    default 10000000
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_H_RES
    int "ST7789 horizontal resolution"
    range 64 480
    default 320
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_V_RES
    int "ST7789 vertical resolution"
    range 64 480
    default 240
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_DRAW_LINES
    int "ST7789 draw chunk lines"
    range 1 120
    default 20
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_SPI_MODE
    int "ST7789 SPI mode (0-3)"
    range 0 3
    default 0
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_COLOR_ORDER_BGR
    bool "ST7789 color order is BGR"
    default n
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_INVERT_COLOR
    bool "ST7789 invert color"
    default y
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_SWAP_COLOR_BYTES
    bool "ST7789 swap color bytes"
    default y
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_BACKLIGHT_ACTIVE_HIGH
    bool "ST7789 backlight active-high"
    default y
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_MIRROR_X
    bool "ST7789 mirror X axis"
    default y
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_MIRROR_Y
    bool "ST7789 mirror Y axis"
    default n
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_SWAP_XY
    bool "ST7789 swap X/Y axis"
    default y
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_X_GAP
    int "ST7789 X gap"
    range 0 480
    default 0
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_Y_GAP
    int "ST7789 Y gap"
    range 0 480
    default 0
    depends on TQ_SCREEN_ENABLE

config TQ_SCREEN_RESET_PIN
    int "ST7789 reset GPIO (-1 if not connected)"
    range -1 48
    default -1
    depends on TQ_SCREEN_ENABLE

endmenu

config TQ_VOICE_CODEC_PA_PIN_REVERSED
    bool "ES8311 PA enable level is active-low"
    default n

config TQ_VOICE_CODEC_OUT_VOL
    int "ES8311 output volume (0-100)"
    range 0 100
    default 70

config TQ_VOICE_CODEC_MIC_GAIN_DB
    int "ES8311 mic gain dB"
    range 0 42
    default 24

endmenu