menu "Example Configuration"

    choice EXAMPLE_LCD_CONTROLLER
        prompt "LCD controller model"
        default EXAMPLE_LCD_CONTROLLER_ST7789
        help
            Select LCD controller model

        config EXAMPLE_LCD_CONTROLLER_ST7789
            bool "ST7789"

        config EXAMPLE_LCD_CONTROLLER_ST7735
            bool "ST7735"

        config EXAMPLE_LCD_CONTROLLER_ILI9341
            bool "ILI9341"

        config EXAMPLE_LCD_CONTROLLER_GC9A01
            bool "GC9A01"
    endchoice

    config EXAMPLE_LCD_ST7735_H_RES
        int "LCD horizontal resolution"
        depends on EXAMPLE_LCD_CONTROLLER_ST7735 || EXAMPLE_LCD_CONTROLLER_ST7789
        default 240 if EXAMPLE_LCD_CONTROLLER_ST7789
        default 128 if EXAMPLE_LCD_CONTROLLER_ST7735
        help
            Horizontal active pixel count.

    config EXAMPLE_LCD_ST7735_V_RES
        int "LCD vertical resolution"
        depends on EXAMPLE_LCD_CONTROLLER_ST7735 || EXAMPLE_LCD_CONTROLLER_ST7789
        default 320 if EXAMPLE_LCD_CONTROLLER_ST7789
        default 160 if EXAMPLE_LCD_CONTROLLER_ST7735
        help
            Vertical active pixel count.

    config EXAMPLE_LCD_ST7735_X_GAP
        int "LCD X offset"
        depends on EXAMPLE_LCD_CONTROLLER_ST7735 || EXAMPLE_LCD_CONTROLLER_ST7789
        default 0
        help
            Extra X offset used when the visible image is shifted.

    config EXAMPLE_LCD_ST7735_Y_GAP
        int "LCD Y offset"
        depends on EXAMPLE_LCD_CONTROLLER_ST7735 || EXAMPLE_LCD_CONTROLLER_ST7789
        default 0
        help
            Extra Y offset used when the visible image is shifted.

    config EXAMPLE_LCD_ST7735_BGR_COLOR
        bool "Use BGR color order"
        depends on EXAMPLE_LCD_CONTROLLER_ST7735 || EXAMPLE_LCD_CONTROLLER_ST7789
        default y
        help
            Disable this if red and blue are swapped on the panel.

    config EXAMPLE_LCD_ST7735_INVERT_COLOR
        bool "Invert LCD color"
        depends on EXAMPLE_LCD_CONTROLLER_ST7735 || EXAMPLE_LCD_CONTROLLER_ST7789
        default n
        help
            Enable this if the panel shows inverted colors.

    config EXAMPLE_LCD_ST7735_MIRROR_X
        bool "Mirror LCD X axis"
        depends on EXAMPLE_LCD_CONTROLLER_ST7735 || EXAMPLE_LCD_CONTROLLER_ST7789
        default n

    config EXAMPLE_LCD_ST7735_MIRROR_Y
        bool "Mirror LCD Y axis"
        depends on EXAMPLE_LCD_CONTROLLER_ST7735 || EXAMPLE_LCD_CONTROLLER_ST7789
        default n

    config EXAMPLE_LCD_TOUCH_ENABLED
        bool "Enable LCD touch"
        default n
        help
            Enable this option if you wish to use display touch. You can select from touch controllers.

    choice EXAMPLE_LCD_TOUCH_CONTROLLER
        prompt "LCD touch controller model"
        depends on EXAMPLE_LCD_TOUCH_ENABLED
        default EXAMPLE_LCD_TOUCH_CONTROLLER_STMPE610
        help
            Select LCD touch controller model

        config EXAMPLE_LCD_TOUCH_CONTROLLER_STMPE610
            bool "STMPE610"
            help
                Touch controller STMPE610 connected via SPI.

        config EXAMPLE_LCD_TOUCH_CONTROLLER_XPT2046
            bool "XPT2046"
            help
                Touch controller XPT2046 connected via SPI.

        config EXAMPLE_LCD_TOUCH_CONTROLLER_GT911
            bool "GT911"
            help
                Touch controller GT911 connected via I2C.
    endchoice

    config EXAMPLE_LCD_MIRROR_Y
        int
        default 1 if EXAMPLE_LCD_TOUCH_ENABLED && EXAMPLE_LCD_TOUCH_CONTROLLER_XPT2046
        default 0
        help
            This value is 1 if XPT2046 touch controller is selected, 0 otherwise.

    config EXAMPLE_LCD_TOUCH_GT911_I2C_SDA
        int "GT911 I2C SDA GPIO"
        depends on EXAMPLE_LCD_TOUCH_ENABLED && EXAMPLE_LCD_TOUCH_CONTROLLER_GT911
        default 15
        help
            GPIO number for the GT911 I2C SDA signal.

    config EXAMPLE_LCD_TOUCH_GT911_I2C_SCL
        int "GT911 I2C SCL GPIO"
        depends on EXAMPLE_LCD_TOUCH_ENABLED && EXAMPLE_LCD_TOUCH_CONTROLLER_GT911
        default 16
        help
            GPIO number for the GT911 I2C SCL signal.

    config EXAMPLE_LCD_TOUCH_GT911_RST_GPIO
        int "GT911 reset GPIO"
        depends on EXAMPLE_LCD_TOUCH_ENABLED && EXAMPLE_LCD_TOUCH_CONTROLLER_GT911
        default 17
        help
            GPIO number for GT911 reset. Set to -1 if the pin is not connected.

    config EXAMPLE_LCD_TOUCH_GT911_INT_GPIO
        int "GT911 interrupt GPIO"
        depends on EXAMPLE_LCD_TOUCH_ENABLED && EXAMPLE_LCD_TOUCH_CONTROLLER_GT911
        default 8
        help
            GPIO number for GT911 interrupt. Set to -1 if the pin is not connected.

    config EXAMPLE_LCD_TOUCH_GT911_I2C_ADDR
        hex "GT911 I2C address"
        depends on EXAMPLE_LCD_TOUCH_ENABLED && EXAMPLE_LCD_TOUCH_CONTROLLER_GT911
        default 0x5D
        help
            GT911 address. Common values are 0x5D and 0x14.

    config EXAMPLE_LCD_TOUCH_GT911_I2C_FREQ_HZ
        int "GT911 I2C clock frequency"
        depends on EXAMPLE_LCD_TOUCH_ENABLED && EXAMPLE_LCD_TOUCH_CONTROLLER_GT911
        default 400000
        help
            I2C clock frequency in Hz.

    config EXAMPLE_LCD_TOUCH_GT911_SWAP_XY
        bool "Swap GT911 X/Y coordinates"
        depends on EXAMPLE_LCD_TOUCH_ENABLED && EXAMPLE_LCD_TOUCH_CONTROLLER_GT911
        default n

    config EXAMPLE_LCD_TOUCH_GT911_MIRROR_X
        bool "Mirror GT911 X coordinates"
        depends on EXAMPLE_LCD_TOUCH_ENABLED && EXAMPLE_LCD_TOUCH_CONTROLLER_GT911
        default n

    config EXAMPLE_LCD_TOUCH_GT911_MIRROR_Y
        bool "Mirror GT911 Y coordinates"
        depends on EXAMPLE_LCD_TOUCH_ENABLED && EXAMPLE_LCD_TOUCH_CONTROLLER_GT911
        default n

endmenu