Initial import of NFC GNSS SDK project
This commit is contained in:
chenjintao
@@ -0,0 +1,274 @@
|
||||
#ifndef _QL_LCD_H_
|
||||
#define _QL_LCD_H_
|
||||
|
||||
typedef enum QL_SPI_LCD_CLK_ENUM {
|
||||
QL_SPI_LCD_CLK_6_5M = 0,
|
||||
QL_SPI_LCD_CLK_13M ,
|
||||
QL_SPI_LCD_CLK_26M ,
|
||||
QL_SPI_LCD_CLK_52M ,
|
||||
QL_SPI_LCD_CLK_3_25M, // the following three options is only for craneM
|
||||
QL_SPI_LCD_CLK_1_625M,
|
||||
QL_SPI_LCD_CLK_812_5k,
|
||||
QL_SPI_CLK_LIMIT
|
||||
}QL_SPI_LCD_CLK_E;
|
||||
|
||||
enum{
|
||||
LCD_WORK_MODE_POLLING,
|
||||
LCD_WORK_MODE_DMA,
|
||||
LCD_WORK_MODE_LIMIT
|
||||
};
|
||||
|
||||
enum{
|
||||
LCD_TYPE_RGB = 0,
|
||||
LCD_TYPE_FSTN = 1,
|
||||
LCD_TYPE_LIMIT
|
||||
};
|
||||
|
||||
enum {
|
||||
QL_LCD_CMD = 0,
|
||||
QL_LCD_DATA,
|
||||
QL_LCD_DELAY,
|
||||
};
|
||||
|
||||
enum{
|
||||
QL_SPI_FORMAT_RGB565 = 0,
|
||||
QL_SPI_FORMAT_RGB666 = 1,
|
||||
QL_SPI_FORMAT_RGB666_2_3 = 2,
|
||||
QL_SPI_FORMAT_RGB888 = 3,
|
||||
QL_SPI_FORMAT_RGB888_2_3 = 4,
|
||||
QL_SPI_FORMAT_LIMIT
|
||||
};
|
||||
|
||||
enum{
|
||||
QL_SPI_EDGE_RISING = 0,
|
||||
QL_SPI_EDGE_FALLING = 1,
|
||||
QL_SPI_EDGE_LIMIT
|
||||
};
|
||||
|
||||
enum{
|
||||
QL_SPI_ENDIAN_LSB = 0,
|
||||
QL_SPI_ENDIAN_MSB = 1,
|
||||
QL_SPI_ENDIAN_LIMIT
|
||||
};
|
||||
|
||||
enum{
|
||||
QL_LCD_CAP_NORMALE = 0,
|
||||
QL_LCD_CAP_FAKE = 1,
|
||||
QL_LCD_CAP_POWERON = 2,
|
||||
QL_LCD_CAP_NOTE = 4, /*has no te signal*/
|
||||
QL_LCD_CAP_LIMIT
|
||||
};
|
||||
|
||||
typedef struct ql_spi_lcd_write_struct {
|
||||
unsigned char type; /* SPI_WRITE_CMD / SPI_WRITE_DATA / SPI_WRITE_DELAY */
|
||||
unsigned char value;
|
||||
unsigned char data_length; /* Only for SPI_WRITE_CMD */
|
||||
}ql_spi_lcd_write_t;
|
||||
|
||||
typedef struct ql_lcd_data_struct
|
||||
{
|
||||
ql_spi_lcd_write_t* init_para; //lcd初始化参数，可选
|
||||
unsigned int init_para_len; //初始化参数长度
|
||||
unsigned short width; //lcd宽
|
||||
unsigned short height; //lcd高
|
||||
unsigned char lcd_cmd_col_set; //可选
|
||||
unsigned char lcd_cmd_row_set; //可选
|
||||
unsigned char lcd_cmd_mem_wr; //可选
|
||||
unsigned int te_signal; //te控制
|
||||
unsigned int spi_wclk; //写时序的时钟
|
||||
unsigned int spi_rclk; //读时序的时钟
|
||||
unsigned int lcd_id; //lcd_id
|
||||
unsigned short format; //刷图格式只支持rgb565
|
||||
unsigned short type; //rgb or 黑白屏
|
||||
unsigned short sample_edge; //spi边沿检测
|
||||
unsigned short endian; //大小端设置
|
||||
unsigned short line_num; //4 or 3
|
||||
unsigned short data_line; //1 or 2
|
||||
unsigned char work_mode; //工作模式dmaorpolling
|
||||
}ql_lcd_data_t;
|
||||
|
||||
|
||||
typedef enum
|
||||
{
|
||||
LCD_SLEEP,
|
||||
LCD_WAKE_UP,
|
||||
}QL_LCD_SLEEP;
|
||||
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_lcd_init
|
||||
*
|
||||
* Description: 初始化lcd——spi控制器
|
||||
*
|
||||
* Parameters: 初始化参数
|
||||
*
|
||||
* Returns: 0：send_success
|
||||
* other: faile
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
int ql_lcd_init(ql_lcd_data_t *lcd_data);
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_lcd_clear_screen
|
||||
*
|
||||
* Description: 清屏函数
|
||||
*
|
||||
* Parameters: rgb565色度值
|
||||
*
|
||||
* Returns: 0：send_success
|
||||
* other: faile
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
int ql_lcd_clear_screen(unsigned short bg_color);
|
||||
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_lcd_clear_screen
|
||||
*
|
||||
* Description: 清屏函数
|
||||
*
|
||||
* Parameters: 保持lcd唤醒
|
||||
*
|
||||
* Returns: 0：send_success
|
||||
* other: faile
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
|
||||
int ql_lcd_wakeup(unsigned int level);
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_lcd_display_on
|
||||
*
|
||||
* Description: 开始刷屏
|
||||
*
|
||||
* Parameters: none
|
||||
*
|
||||
* Returns: 0：send_success
|
||||
* other: faile
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
int ql_lcd_display_on(void);
|
||||
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_lcd_display_off
|
||||
*
|
||||
* Description: 停止刷屏
|
||||
*
|
||||
* Parameters: 保持lcd唤醒
|
||||
*
|
||||
* Returns: 0：send_success
|
||||
* other: faile
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
int ql_lcd_display_off(void);
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_spi_lcd_write_cmd
|
||||
*
|
||||
* Description: 往lcd写指令
|
||||
*
|
||||
* Parameters: 要写的指令
|
||||
*
|
||||
* Returns: 0：send_success
|
||||
* other: faile
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
int ql_spi_lcd_write_cmd(unsigned char cmd);
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: qql_spi_lcd_write_data
|
||||
*
|
||||
* Description: 往lcd写数据
|
||||
*
|
||||
* Parameters: 要写的数据
|
||||
*
|
||||
* Returns: 0：send_success
|
||||
* other: faile
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
int ql_spi_lcd_write_data(unsigned char data);
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_lcd_updata_config
|
||||
*
|
||||
* Description: 更新lcd驱动参数
|
||||
*
|
||||
* Parameters: 初始化参数
|
||||
*
|
||||
* Returns: 0：send_success
|
||||
* other: faile
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
int ql_lcd_updata_config(ql_lcd_data_t *lcd_data);
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_lcd_write_sync
|
||||
*
|
||||
* Description: lcd刷图函数
|
||||
*
|
||||
* Parameters: pbuffer：图片buffer
|
||||
* start_x：图片起始位置横坐标
|
||||
* start_y：图片起始位置纵坐标
|
||||
* end_x： 图片结束位置横坐标
|
||||
* end_y： 图片结束位置纵坐标
|
||||
* Returns: 0：send_success
|
||||
* other: faile
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
int ql_lcd_write_sync(unsigned char *pbuffer, unsigned short start_x, unsigned short start_y, unsigned short end_x, unsigned short end_y);
|
||||
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_lcd_read_id
|
||||
*
|
||||
* Description: 获取lcd芯片id
|
||||
*
|
||||
* Parameters: none
|
||||
*
|
||||
* Returns: 0：send_success
|
||||
* other: faile
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
unsigned int ql_lcd_read_id(void);
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_lcd_write
|
||||
*
|
||||
* Description: lcd异步刷新 仅1609支持此接口
|
||||
*
|
||||
* Parameters:
|
||||
*
|
||||
* Returns:
|
||||
*
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
int ql_lcd_write(unsigned char *pbuffer, unsigned short start_x, unsigned short start_y, unsigned short end_x, unsigned short end_y);
|
||||
/***********************************************************************
|
||||
*
|
||||
* Name: ql_lcd_osd_config
|
||||
*
|
||||
* Description: 配置lcd的背景图层，仅1609支持
|
||||
*
|
||||
* Parameters:
|
||||
*
|
||||
* Returns:
|
||||
*
|
||||
* Notes:
|
||||
*
|
||||
***********************************************************************/
|
||||
int ql_lcd_osd_config(unsigned char *pbuffer, unsigned short start_x, unsigned short start_y, unsigned short end_x, unsigned short end_y);
|
||||
|
||||
#endif
|
||||
|
||||
Reference in New Issue
Block a user