Initial import of NFC GNSS SDK project

2026-09-15 16:10:12 +08:00
commit 2746cc3d4e
3070 changed files with 892062 additions and 0 deletions
@@ -0,0 +1,230 @@
+/******************************************************************************
+
+** (C) Copyright 2007 Marvell International Ltd. ?
+
+**?All Rights Reserved
+
+**
+
+**  FILENAME:	PlatformConfig.h
+
+**
+
+**  PURPOSE: 	Platform specific header to set parameters
+
+** 			
+
+**                  
+
+******************************************************************************/
+
+
+
+#ifndef __platform_config_h
+
+#define __platform_config_h
+
+
+
+#include "Typedef.h"
+#include "Errors.h"
+#include "smemc.h"
+//
+// Timers
+#define APB_CU_ENABLE (*APB_CU_CR = 0x33)
+#define TIMER_FREQ(A)  (((A)*13) >> 2)
+
+// MMC 
+#define NUMBER_OF_SUPPORTED_SDMMC_CONFIGURATIONS 1
+
+// SPI
+#define SSP_BASE_FOR_SPI		 SSP3_BASE
+#define spi_reg_bit_set(reg, val)
+#define spi_reg_bit_clr(reg, val)
+#define SSP_RX_DMA_DEVICE		DMAC_SSP_2_RX
+#define SSP_TX_DMA_DEVICE		DMAC_SSP_2_TX
+
+
+//
+// Clock in nanoseconds. Not likely to be changing all that often...
+
+//
+
+#define NAND_CONTROLLER_CLOCK  104  // MHz
+
+#define UARTCLK    14745600
+
+
+
+#define PlatformISRAMLimit	0x12000 //768KB - 76KB (0xC0000 - 0x13000)
+
+
+
+//
+// Clock in nanoseconds. Not likely to be changing all that often...
+//
+#define DFC_WORKAROUND 0
+
+// Bit 19 of control register must be written as 0
+//#define DFC_INITIAL_CONTROL 0xCC021FFF
+#define DFC_INITIAL_CONTROL 0x8C821FFF
+#define	DFC_INITIAL_TIMING0	0x003F3F3F
+#define DFC_INITIAL_TIMING1 0x100080FF //tR set to 52.4 usec
+
+
+
+#define TIMOffset_CS0 0x00000000 // offset for TIM on CS0	
+
+
+
+#define CHIPBOOTTYPE (volatile unsigned long *)GEU_FUSE_VAL_APCFG1
+
+
+
+
+
+#define ASCR	(volatile unsigned long *)PMUM_CPSR //See PMUM.h
+#define ARSR	(volatile unsigned long *)PMUM_CRSR 
+
+#define AD3SR	(volatile unsigned long *)PMUM_AWUCRS 
+#define AD3R	(volatile unsigned long *)PMUM_AWUCRM 
+
+
+
+#define APBC_AIB_CLK_RST (volatile unsigned long *)0xD401503C
+
+
+#define APPS_PAD_BASE  0xd401e000
+
+#define SMEMC_BASE	   SMC_BASE	
+
+
+
+// OneNand boots from CS0 only
+
+#define FLEX_BOOTRAM_MAIN_BASE	CS0Base			
+
+
+
+
+
+//
+
+// Multifunction Padring Structures
+
+//
+
+typedef struct 
+
+{
+
+  volatile int *    registerAddr;
+
+  unsigned int      regValue;
+
+  unsigned int      defaultValue;
+
+}CS_REGISTER_PAIR_S, *P_CS_REGISTER_PAIR_S;
+
+
+
+
+
+//Prototypes
+
+UINT_T ChipSelect2(void);
+
+UINT_T ChipSelect0(void);
+
+void ChipSelectDFC(void);
+
+void RestoreDefaultConfig(void);
+
+void SaveDefaultConfig(void);
+
+void ChipSelectOneNAND( void );
+
+void ChipSelectMsys( void );
+
+UINT_T PlatformMdocRdyForXIPAccess( void );
+
+//void PlatformResumeSetup(pQuick_Resume_Function *, pTim_Resume_Function *);
+
+UINT_T getPlatformPortSelection(unsigned int *);
+
+UINT8_T* GetProbeOrder(void);
+
+UINT_T PlatformUARTConfig(void);
+
+UINT_T PlatformAltUARTConfig(void);
+
+#if 0
+//UDC 1.1 Functions
+
+UINT_T SetupSingleEndedPort2(void);
+
+UINT_T PlatformUsbTransmit(UINT_T, UINT8_T*);
+
+void PlatformUsbInit(UINT_T);
+
+void PlatformUsbShutdown(void);
+
+void PlatformUsbDmaHandler(void);
+
+void PlatformUsbInterruptHandler(void);
+
+//U2D Functions
+
+void PlatformU2DInit(void);
+
+UINT_T PlatformU2DTransmit(UINT_T, UINT8_T*, UINT_T);
+
+void PlatformU2DShutdown(void);
+
+void PlatformU2DInterruptHandler(void);
+
+
+
+//CI2 USB Functions
+void PlatformCI2Init(void);
+UINT_T PlatformCI2Transmit(UINT_T, UINT8_T*, UINT_T);
+void PlatformCI2Shutdown(void);
+void PlatformCI2InterruptHandler(void);
+
+#endif
+
+// DCB added these to get things compiling
+
+//------------------------------------------
+
+#define PLATFORM_CHIPBOOTTYPE_FUSE_REG 2
+
+UINT_T CheckSuperSetPortEnablement(UINT_T Port);
+//UINT_T  GetPlatformFuses(UINT_T platformFuses, pFUSE_SET pTBR_Fuse);
+
+UINT_T ReturnServicesFuses(UINT_T ServiceNumber);
+UINT_T PlatformUARTConfig(void);
+UINT_T PlatformAltUARTConfig(void);
+
+
+
+//specify if the platform requires save state for trusted operation
+
+UINT_T PlatformSaveStateRequired(void);
+
+
+
+//external prototypes
+
+
+#if 0
+extern UINT_T GetOSCR0(void);
+
+extern UINT_T OSCR0IntervalInSec(UINT_T Before, UINT_T After);
+
+extern UINT_T OSCR0IntervalInMilli(UINT_T Before, UINT_T After);
+
+extern UINT_T OSCR0IntervalInMicro(UINT_T Before, UINT_T After);
+#endif
+
+#endif