chenjintao/lucky-cat
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

fix(platform): correct PA GPIO10 and motor GPIO9 mapping

Browse Source
This commit is contained in:
chenjintao
2026-10-27 17:08:01 +08:00
parent 002967b21f
commit 147bfe9b70
7 changed files with 24 additions and 24 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/firmware-pin-usage.md
+3 -3
View File
@@ -20,7 +20,7 @@ No new GPIO option has been added for full-charge sensing or the rocker motor.
| 5 | `CONFIG_TQ_SCREEN_SPI_CS_GPIO` | Output | LCD CS |
| 6 | `CONFIG_TQ_SCREEN_DC_GPIO` | Output | LCD data/command; no old switch flying wire |
| 7 | `CONFIG_TQ_SCREEN_RESET_PIN` | Output | LCD reset, active low |
| 9 | `CONFIG_MULTIMODAL_AUDIO_PA_GPIO` | Output | Audio amplifier enable |
| 10 | `CONFIG_MULTIMODAL_AUDIO_PA_GPIO` | Output | Audio amplifier enable |
| 11 | `CONFIG_TQ_CALIBRATION_SWITCH_GPIO` | Input | Switch 1 / calibration, active low with pull-up |
| 12 | `CONFIG_TQ_SLOT_SWITCH_GPIO` | Input | Switch 2 / slot trigger, active low with pull-up |
| 13 | `CONFIG_MULTIMODAL_PTT_BUTTON_GPIO` | Input | TTP223 touch output / PTT; previous active-low/pull-up settings retained pending measured polarity |
@@ -40,7 +40,7 @@ No new GPIO option has been added for full-charge sensing or the rocker motor.
The old `platform_io_effects_init()` startup call has been removed: its GPIO4
RMT and GPIO5 pulse workers conflict with new LCD BLK/CS. The old implementation
is retained as source, but no startup path calls it. GPIO10 motor control has
is retained as source, but no startup path calls it. GPIO9 motor control has
not been enabled as a replacement.
## Disabled Or Not Connected In Defaults
@@ -52,7 +52,7 @@ not been enabled as a replacement.
| `CONFIG_TQ_RESET_BUTTON_ENABLE` | Disabled | The old optional reset default GPIO14 now belongs to stepper IN1; configure separate physical wiring before enabling |
| `CONFIG_TQ_BATTERY_SHUTDOWN_WAKE_BUTTON_GPIO` | -1 | No additional deep-sleep wake button |
| GPIO8 / 充满检测 | Input | `CONFIG_TQ_BATTERY_FULL_GPIO=8`, low-active TP4056 STDBY# via Q8 |
| GPIO10 / 马达控制 | Not consumed | Rocker-motor gate held off by external R30 pull-down; no new option/driver added |
| GPIO9 / 马达控制 | Not consumed | Rocker-motor gate held off by external R30 pull-down; no new option/driver added |
| GPIO3 / 35 / 36 / 37 / 45 / 46 | NC on schematic | Do not infer arbitrary availability from NC |
Mechanical switches use pull-up only. PTT and charger active levels are retained