chenjintao/lucky-cat
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

feat(control-plane): add configurable Wi-Fi reset button

Browse Source
This commit is contained in:
chenjintao
2026-08-18 16:00:10 +08:00
parent 96f5e535d3
commit 22a409973e
10 changed files with 153 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/firmware-pin-usage.md
+1
View File
@@ -20,6 +20,7 @@ the ESP32-S3 MCU perspective.
| 11 | `CONFIG_MULTIMODAL_AUDIO_PA_GPIO` | Output | Audio amplifier | PA enable | Managed by codec GPIO interface |
| 12 | `CONFIG_TQ_CALIBRATION_SWITCH_GPIO` | Input | Turntable calibration | Button 1 / SW1 direction calibration | Active-low, external and internal pull-up |
| 13 | `CONFIG_MULTIMODAL_PTT_BUTTON_GPIO` | Input | Keys / multimodal | Button 2 / K2 push-to-talk | Active-low, external and internal pull-up |
| 14 | `CONFIG_TQ_RESET_BUTTON_GPIO` | Input when enabled | Optional reset key | Hold to clear saved Wi-Fi credentials and restart | Disabled by default; active-low with internal pull-up when enabled |
| 15 | `CONFIG_TQ_SCREEN_SPI_CS_GPIO` | Output | LCD | ST7789P3 SPI chip select | SPI2 host |
| 16 | `CONFIG_TQ_SCREEN_DC_GPIO` | Output | LCD | ST7789P3 data/command select | Initialized low |
| 17 | `CONFIG_TQ_SCREEN_RESET_PIN` | Output | LCD | ST7789P3 panel reset | Active-low reset; `-1` disables hardware reset |
docs/gpio-map.md
+1 -1
View File
@@ -30,7 +30,7 @@ hold net; that assignment is not valid for the current board.
| 19 | GPIO11 | PA_CTRL | Output | Audio power-amplifier enable | Amplifier control |
| 20 | GPIO12 | SW1 | Input | Button 1 / turntable calibration switch | External 10 kOhm pull-up; active low |
| 21 | GPIO13 | SW2 | Input | Button 2 / K2 push-to-talk input | External 10 kOhm pull-up; active low |
| 22 | GPIO14 | UNASSIGNED | N/A | No connection assigned | Reserved; no signal assigned |
| 22 | GPIO14 | UNASSIGNED / RESET_KEY | Optional input | Configurable Wi-Fi reset button | Unassigned and disabled by default; active-low with internal pull-up when enabled |
| 23 | GPIO21 | IN4 | Output | ULN2003 IN4 | Stepper motor phase control |
| 24 | GPIO47 | IN3 | Output | ULN2003 IN3 | Stepper motor phase control |
| 25 | GPIO48 | IN2 | Output | ULN2003 IN2 | Stepper motor phase control |