1309 lines
47 KiB
Plaintext
1309 lines
47 KiB
Plaintext
menu "Example Configuration"
|
|
|
|
choice LCD_TYPE
|
|
prompt "LCD module type"
|
|
default LCD_TYPE_AUTO
|
|
help
|
|
The type of LCD on the evaluation board.
|
|
|
|
config LCD_TYPE_AUTO
|
|
bool "Auto detect"
|
|
config LCD_TYPE_ST7789V
|
|
bool "ST7789V (WROVER Kit v2 or v3)"
|
|
config LCD_TYPE_ILI9341
|
|
bool "ILI9341 (WROVER Kit v1 or DevKitJ v1)"
|
|
endchoice
|
|
|
|
config LCD_OVERCLOCK
|
|
bool
|
|
prompt "Run LCD at higher clock speed than allowed"
|
|
default "n"
|
|
help
|
|
The ILI9341 and ST7789 specify that the maximum clock speed for the SPI interface is 10MHz. However,
|
|
in practice the driver chips work fine with a higher clock rate, and using that gives a better framerate.
|
|
Select this to try using the out-of-spec clock rate.
|
|
|
|
menu "Wi-Fi Stability"
|
|
|
|
config TQ_WIFI_STA_POWER_SAVE
|
|
bool "Enable STA modem power save after connection"
|
|
default n
|
|
help
|
|
Enable only for battery-first operation. TQ_cat keeps a
|
|
realtime WebSocket/audio session open, so the default disables
|
|
station modem sleep to reduce beacon timeout risk.
|
|
|
|
config TQ_WIFI_STA_INACTIVE_TIME_SEC
|
|
int "STA beacon inactive timeout (seconds)"
|
|
default 15
|
|
range 3 60
|
|
help
|
|
ESP-IDF disconnects the station when no beacon is received
|
|
within this interval. The ESP-IDF default is 6 seconds; this
|
|
firmware uses a longer timeout to tolerate brief beacon loss on
|
|
crowded 2.4 GHz networks.
|
|
|
|
endmenu
|
|
|
|
menu "Runtime Diagnostics"
|
|
|
|
config TQ_BOOT_SEQUENCE_DRY_RUN
|
|
bool "Run Plan A boot sequence as event log only"
|
|
default n
|
|
help
|
|
Use the Plan A startup order as a dry-run orchestration log.
|
|
Only the event observer runtime is started. Business modules
|
|
such as LCD, Wi-Fi, WebSocket, fortune, LAN HTTP, calibration,
|
|
and boot audio are not actually triggered.
|
|
|
|
config TQ_BOOT_SOUND_TIMEOUT_MS
|
|
int "Boot sound timeout (ms)"
|
|
default 3000
|
|
range 100 10000
|
|
help
|
|
Maximum caller-visible time budget for the Plan A boot sound
|
|
stage. The current prompt backend may return
|
|
ESP_ERR_NOT_SUPPORTED before this timeout.
|
|
|
|
config TQ_BOOT_SOUND_FILE
|
|
string "Boot sound file"
|
|
default ""
|
|
help
|
|
Optional boot sound file path for the voice prompt backend.
|
|
Leave empty to use the semantic connecting prompt fallback.
|
|
|
|
config TQ_TASK_MONITOR_ENABLE
|
|
bool "Enable periodic FreeRTOS task monitor log"
|
|
default y
|
|
help
|
|
Periodically print a compact FreeRTOS task table to the log.
|
|
|
|
config TQ_TASK_MONITOR_INTERVAL_MS
|
|
int "Task monitor log interval (ms)"
|
|
default 10000
|
|
range 1000 600000
|
|
depends on TQ_TASK_MONITOR_ENABLE
|
|
help
|
|
Interval for periodic task table logging.
|
|
|
|
config TQ_TASK_MONITOR_MAX_TASKS
|
|
int "Task monitor max task entries"
|
|
default 64
|
|
range 16 128
|
|
depends on TQ_TASK_MONITOR_ENABLE
|
|
help
|
|
Maximum FreeRTOS task entries captured per report.
|
|
|
|
config TQ_SYSTEM_EVENT_ENABLE
|
|
bool "Enable control-plane system event task"
|
|
default y
|
|
help
|
|
Start the staged system event dispatcher task.
|
|
|
|
config TQ_SYSTEM_EVENT_QUEUE_LEN
|
|
int "System event queue length"
|
|
default 32
|
|
range 8 128
|
|
depends on TQ_SYSTEM_EVENT_ENABLE
|
|
help
|
|
Maximum number of queued control-plane system events.
|
|
|
|
config TQ_SYSTEM_EVENT_TASK_STACK
|
|
int "System event task stack size"
|
|
default 4096
|
|
range 2048 8192
|
|
depends on TQ_SYSTEM_EVENT_ENABLE
|
|
help
|
|
Stack size in bytes for the control-plane system event task.
|
|
|
|
config TQ_KEY_INPUT_ENABLE
|
|
bool "Enable interrupt-driven key input task"
|
|
default y
|
|
help
|
|
Start the staged GPIO interrupt key input task for PTT, SW1, and SW2.
|
|
|
|
config TQ_KEY_INPUT_TASK_STACK
|
|
int "Key input task stack size"
|
|
default 4096
|
|
range 2048 8192
|
|
depends on TQ_KEY_INPUT_ENABLE
|
|
help
|
|
Stack size in bytes for the key input state-machine task.
|
|
|
|
config TQ_KEY_IRQ_QUEUE_LEN
|
|
int "Key GPIO interrupt queue length"
|
|
default 16
|
|
range 4 64
|
|
depends on TQ_KEY_INPUT_ENABLE
|
|
help
|
|
Maximum number of queued raw GPIO-change events from ISR context.
|
|
|
|
config TQ_KEY_INPUT_POLL_MS
|
|
int "Key input timer poll interval (ms)"
|
|
default 20
|
|
range 5 100
|
|
depends on TQ_KEY_INPUT_ENABLE
|
|
help
|
|
Maximum timer polling delay used for debounce, long press, and click decisions.
|
|
|
|
config TQ_KEY_DEBOUNCE_INTERVAL_MS
|
|
int "Key debounce interval (ms)"
|
|
default 20
|
|
range 5 200
|
|
depends on TQ_KEY_INPUT_ENABLE
|
|
help
|
|
Stable-level interval required before a raw GPIO change becomes a key event.
|
|
|
|
config TQ_KEY_LONG_PRESS_MS
|
|
int "Key long-press threshold (ms)"
|
|
default 800
|
|
range 100 5000
|
|
depends on TQ_KEY_INPUT_ENABLE
|
|
help
|
|
Press duration required before emitting a long-press-start event.
|
|
|
|
config TQ_KEY_DOUBLE_CLICK_MS
|
|
int "Key double-click threshold (ms)"
|
|
default 300
|
|
range 100 1000
|
|
depends on TQ_KEY_INPUT_ENABLE
|
|
help
|
|
Maximum gap between short clicks before emitting a double-click event.
|
|
|
|
endmenu
|
|
|
|
menu "TQ Screen"
|
|
|
|
config TQ_SCREEN_ENABLE
|
|
bool "Enable LCD screen runtime"
|
|
default y
|
|
help
|
|
Disable when the connected display hardware does not match this
|
|
firmware's LCD driver.
|
|
|
|
config TQ_SCREEN_COLOR_ORDER_BGR
|
|
bool "Use BGR color order"
|
|
default n
|
|
help
|
|
Disabled means RGB color order.
|
|
|
|
config TQ_SCREEN_INVERT_COLOR
|
|
bool "Invert panel color"
|
|
default y
|
|
|
|
config TQ_SCREEN_SWAP_COLOR_BYTES
|
|
bool "Swap RGB565 color bytes on bus"
|
|
default y
|
|
|
|
config TQ_SCREEN_BACKLIGHT_ACTIVE_HIGH
|
|
bool "Backlight active high"
|
|
default y
|
|
|
|
config TQ_SCREEN_MIRROR_X
|
|
bool "Mirror panel in X direction"
|
|
default y
|
|
|
|
config TQ_SCREEN_SWAP_XY
|
|
bool "Swap panel X/Y axes"
|
|
default y
|
|
|
|
config TQ_SCREEN_X_GAP
|
|
int "Panel X gap"
|
|
default 0
|
|
range 0 320
|
|
|
|
config TQ_SCREEN_Y_GAP
|
|
int "Panel Y gap"
|
|
default 0
|
|
range 0 320
|
|
|
|
config TQ_SCREEN_RESET_PIN
|
|
int "Panel reset GPIO (-1 to disable hardware reset)"
|
|
default 3
|
|
range -1 48
|
|
help
|
|
This board maps LCD_RST to IO3. Use -1 only when panel reset pin
|
|
is physically not connected.
|
|
|
|
config TQ_SCREEN_SPI_MISO_GPIO
|
|
int "LCD SPI MISO GPIO (-1 to disable)"
|
|
default -1
|
|
range -1 48
|
|
help
|
|
LCD SPI MISO GPIO. Use -1 when the panel does not connect MISO.
|
|
|
|
config TQ_SCREEN_SPI_MOSI_GPIO
|
|
int "LCD SPI MOSI GPIO"
|
|
default 17
|
|
range 0 48
|
|
help
|
|
LCD SPI MOSI GPIO.
|
|
|
|
config TQ_SCREEN_SPI_CLK_GPIO
|
|
int "LCD SPI clock GPIO"
|
|
default 18
|
|
range 0 48
|
|
help
|
|
LCD SPI clock GPIO.
|
|
|
|
config TQ_SCREEN_SPI_CS_GPIO
|
|
int "LCD SPI CS GPIO"
|
|
default 6
|
|
range 0 48
|
|
help
|
|
LCD SPI chip-select GPIO.
|
|
|
|
config TQ_SCREEN_DC_GPIO
|
|
int "LCD D/C GPIO"
|
|
default 7
|
|
range 0 48
|
|
help
|
|
LCD data/command GPIO.
|
|
|
|
config TQ_SCREEN_BACKLIGHT_GPIO
|
|
int "LCD backlight GPIO"
|
|
default 9
|
|
range 0 48
|
|
help
|
|
LCD backlight control GPIO.
|
|
|
|
config TQ_SCREEN_SPI_PIXEL_CLOCK_HZ
|
|
int "LCD SPI pixel clock (Hz)"
|
|
default 20000000
|
|
range 10000000 40000000
|
|
help
|
|
SPI pixel clock for the ST7789 panel. Use 20000000 as the
|
|
conservative production default; validate color stability and
|
|
tearing on real hardware before trying 40000000.
|
|
|
|
config TQ_SCREEN_LVGL_DRAW_BUF_LINES
|
|
int "LVGL draw buffer lines"
|
|
default 40
|
|
range 20 60
|
|
help
|
|
Number of display rows per LVGL DMA draw buffer. The driver
|
|
allocates two internal DMA-capable RGB565 buffers, so 40 lines
|
|
uses about 50 KiB and 60 lines uses about 75 KiB.
|
|
|
|
config TQ_SCREEN_COLOR_AUTOTEST
|
|
bool "Enable color auto-test loop"
|
|
default n
|
|
help
|
|
Periodically switches panel color-related parameters at runtime
|
|
and logs active profile for manual color debugging.
|
|
|
|
config TQ_SCREEN_COLOR_AUTOTEST_INTERVAL_MS
|
|
int "Color auto-test switch interval (ms)"
|
|
default 3000
|
|
range 500 60000
|
|
depends on TQ_SCREEN_COLOR_AUTOTEST
|
|
help
|
|
Interval for color profile switching in milliseconds.
|
|
|
|
endmenu
|
|
|
|
menu "TQ Slot Machine"
|
|
|
|
config TQ_SLOT_SWITCH_GPIO
|
|
int "Slot feature switch GPIO"
|
|
default 45
|
|
range 0 48
|
|
help
|
|
GPIO used for the slot machine feature switch.
|
|
Default from docs/gpio-map.md (SW_2 on IO45).
|
|
|
|
config TQ_SLOT_SWITCH_ACTIVE_LEVEL
|
|
int "Slot feature switch active level"
|
|
default 0
|
|
range 0 1
|
|
help
|
|
Logic level that means the slot machine feature switch is active.
|
|
Default from docs/gpio-map.md (SW_2 is active-low).
|
|
|
|
config TQ_SLOT_SWITCH_PULLUP
|
|
bool "Enable slot feature switch pull-up"
|
|
default y
|
|
help
|
|
Enable the internal pull-up for the default active-low slot switch wiring.
|
|
|
|
config TQ_SLOT_SWITCH_PULLDOWN
|
|
bool "Enable slot feature switch pull-down"
|
|
default n
|
|
help
|
|
Leave disabled for the default active-low slot switch wiring.
|
|
|
|
config TQ_SLOT_SWITCH_ENABLE
|
|
bool "Enable slot feature switch worker"
|
|
default y
|
|
help
|
|
Disable when the slot switch GPIO is unavailable or assigned to
|
|
another board function.
|
|
|
|
endmenu
|
|
|
|
menu "TQ Calibration"
|
|
|
|
config TQ_STEPPER_ENABLE
|
|
bool "Enable turntable stepper driver"
|
|
default y
|
|
help
|
|
Disable when the turntable stepper wiring is not present.
|
|
|
|
config TQ_BOOT_TURNTABLE_CALIBRATION_ENABLE
|
|
bool "Run turntable calibration at boot"
|
|
default y
|
|
help
|
|
Disable when the turntable calibration mechanism is not present.
|
|
|
|
config TQ_STEPPER_IN1_GPIO
|
|
int "Turntable stepper IN1 GPIO"
|
|
default 13
|
|
range 0 48
|
|
help
|
|
GPIO connected to the turntable stepper driver IN1 input.
|
|
|
|
config TQ_STEPPER_IN2_GPIO
|
|
int "Turntable stepper IN2 GPIO"
|
|
default 14
|
|
range 0 48
|
|
help
|
|
GPIO connected to the turntable stepper driver IN2 input.
|
|
|
|
config TQ_STEPPER_IN3_GPIO
|
|
int "Turntable stepper IN3 GPIO"
|
|
default 21
|
|
range 0 48
|
|
help
|
|
GPIO connected to the turntable stepper driver IN3 input.
|
|
|
|
config TQ_STEPPER_IN4_GPIO
|
|
int "Turntable stepper IN4 GPIO"
|
|
default 47
|
|
range 0 48
|
|
help
|
|
GPIO connected to the turntable stepper driver IN4 input.
|
|
|
|
config TQ_CALIBRATION_SWITCH_GPIO
|
|
int "Direction calibration switch GPIO"
|
|
default 48
|
|
range 0 48
|
|
help
|
|
GPIO used for the turntable direction calibration switch.
|
|
|
|
config TQ_CALIBRATION_SWITCH_ACTIVE_LEVEL
|
|
int "Direction calibration switch active level"
|
|
default 0
|
|
range 0 1
|
|
help
|
|
Logic level that means the calibration switch is active.
|
|
|
|
config TQ_CALIBRATION_SWITCH_PULLUP
|
|
bool "Enable direction calibration switch pull-up"
|
|
default y
|
|
help
|
|
Enable the internal pull-up for the default active-low wiring.
|
|
|
|
config TQ_CALIBRATION_SWITCH_PULLDOWN
|
|
bool "Enable direction calibration switch pull-down"
|
|
default n
|
|
help
|
|
Leave disabled for the default active-low wiring.
|
|
|
|
endmenu
|
|
|
|
menu "TQ Power"
|
|
|
|
config TQ_POWER_HOLD_GPIO
|
|
int "Power hold GPIO (-1 to disable)"
|
|
default -1
|
|
range -1 48
|
|
help
|
|
GPIO used to keep board power enabled after boot. Set to -1
|
|
when no external power-hold circuit is connected.
|
|
|
|
config TQ_POWER_HOLD_ACTIVE_LEVEL
|
|
int "Power hold active level"
|
|
default 1
|
|
range 0 1
|
|
help
|
|
Logic level that keeps the external power-hold circuit active.
|
|
|
|
endmenu
|
|
|
|
menu "Wi-Fi Provisioning"
|
|
|
|
config MULTIMODAL_WIFI_SSID
|
|
string "Seed Wi-Fi SSID"
|
|
default ""
|
|
help
|
|
Optional seed SSID written to NVS when no saved credentials exist.
|
|
|
|
config MULTIMODAL_WIFI_PASSWORD
|
|
string "Seed Wi-Fi password"
|
|
default ""
|
|
help
|
|
Password for the seed SSID.
|
|
|
|
config MULTIMODAL_CONNECT_TIMEOUT_MS
|
|
int "Wi-Fi connect timeout (ms)"
|
|
default 10000
|
|
help
|
|
Timeout for Wi-Fi STA connection attempts in milliseconds.
|
|
|
|
config VOICE_PROMPT_WIFI_SUCCESS_FILE
|
|
string "Wi-Fi success prompt file"
|
|
default ""
|
|
help
|
|
Optional file path for the Wi-Fi connected semantic prompt.
|
|
|
|
config VOICE_PROMPT_AFTER_WIFI_SUCCESS_FILE
|
|
string "Post Wi-Fi success prompt file"
|
|
default ""
|
|
help
|
|
Optional file path for the prompt played after Wi-Fi success.
|
|
|
|
config VOICE_PROMPT_WIFI_CONNECTING_FILE
|
|
string "Wi-Fi connecting prompt file"
|
|
default ""
|
|
help
|
|
Optional file path for the Wi-Fi connecting semantic prompt.
|
|
|
|
config VOICE_PROMPT_WIFI_FAILED_FILE
|
|
string "Wi-Fi failed prompt file"
|
|
default ""
|
|
help
|
|
Optional file path for the Wi-Fi failed semantic prompt.
|
|
|
|
config VOICE_PROMPT_WIFI_CONFIG_FILE
|
|
string "Wi-Fi config prompt file"
|
|
default ""
|
|
help
|
|
Optional file path for the Wi-Fi configuration semantic prompt.
|
|
|
|
config MULTIMODAL_DEVICE_ID
|
|
string "Device ID (optional)"
|
|
default ""
|
|
help
|
|
Optional device ID used by device-side services.
|
|
|
|
config MULTIMODAL_SERIAL_NUMBER
|
|
string "Serial number (optional)"
|
|
default ""
|
|
help
|
|
Optional serial number used by device-side services.
|
|
|
|
endmenu
|
|
|
|
menu "Daily Fortune"
|
|
|
|
config FORTUNE_ENABLE
|
|
bool "Enable device-side daily fortune refresh"
|
|
default y
|
|
help
|
|
Persist a provisioned birth profile, fetch the daily fortune
|
|
after network/time synchronization, and refresh it at local
|
|
midnight.
|
|
|
|
config FORTUNE_API_URL
|
|
string "Daily fortune API URL"
|
|
depends on FORTUNE_ENABLE
|
|
default "https://gz.api.talkingq.com/token/api/device/fortune/daily-wealth"
|
|
help
|
|
HTTPS endpoint used for the daily fortune POST request.
|
|
|
|
config FORTUNE_TIMEZONE
|
|
string "Fortune request time zone"
|
|
depends on FORTUNE_ENABLE
|
|
default "Asia/Shanghai"
|
|
help
|
|
IANA time-zone name sent to the fortune API.
|
|
|
|
config FORTUNE_SNTP_SERVER
|
|
string "SNTP server"
|
|
depends on FORTUNE_ENABLE
|
|
default "ntp.aliyun.com"
|
|
help
|
|
SNTP server used to establish wall-clock time before daily
|
|
scheduling starts.
|
|
|
|
config FORTUNE_CONNECT_TIMEOUT_MS
|
|
int "Fortune HTTP timeout (ms)"
|
|
depends on FORTUNE_ENABLE
|
|
default 10000
|
|
range 1000 60000
|
|
help
|
|
Connection and response timeout for one fortune HTTP request.
|
|
|
|
config FORTUNE_USE_DEVICE_JWT
|
|
bool "Attach cached device JWT to fortune requests"
|
|
depends on FORTUNE_ENABLE && AUTH_V2_ENABLE
|
|
default n
|
|
help
|
|
Add the cached device JWT as an Authorization Bearer token.
|
|
Leave disabled while the fortune endpoint uses deviceId only.
|
|
|
|
config FORTUNE_USER_CONFIG_HTTP_PORT
|
|
int "LAN user configuration HTTP port"
|
|
depends on FORTUNE_ENABLE
|
|
default 80
|
|
range 1 65535
|
|
help
|
|
TCP port for the device-hosted user profile and fortune page.
|
|
|
|
config FORTUNE_USER_CONFIG_MDNS_HOSTNAME
|
|
string "LAN user configuration mDNS hostname"
|
|
depends on FORTUNE_ENABLE
|
|
default "tq-cat"
|
|
help
|
|
Host label advertised through mDNS. The default page URL is
|
|
http://tq-cat.local/.
|
|
|
|
endmenu
|
|
|
|
menu "WebSocket / Multimodal"
|
|
|
|
config ENABLE_MULTIMODAL_INTERACTION
|
|
bool "Enable multimodal interaction module"
|
|
default y
|
|
help
|
|
Master switch for multimodal WebSocket interaction features.
|
|
|
|
config MULTIMODAL_USE_STATIC_CREDENTIALS
|
|
bool "Use static WebSocket credentials (skip token request)"
|
|
default n
|
|
help
|
|
When enabled, multimodal auth uses the configured API key and
|
|
workspace ID directly and does not request a temporary device token.
|
|
|
|
config MULTIMODAL_AUTH_BYPASS_TOKEN_SERVICE
|
|
bool "Bypass token service and force static credentials (debug)"
|
|
default n
|
|
help
|
|
When enabled, token HTTP auth flow is bypassed at compile time.
|
|
WebSocket auth uses API key/workspace/app fields directly.
|
|
|
|
if MULTIMODAL_USE_STATIC_CREDENTIALS || MULTIMODAL_AUTH_BYPASS_TOKEN_SERVICE
|
|
|
|
config MULTIMODAL_API_KEY
|
|
string "WebSocket API key (Bearer token)"
|
|
default ""
|
|
help
|
|
API key used as Authorization Bearer token for WebSocket connection.
|
|
|
|
config MULTIMODAL_WORKSPACE_ID
|
|
string "Workspace ID"
|
|
default ""
|
|
help
|
|
Workspace identifier sent in Start directive payload.
|
|
|
|
config MULTIMODAL_APP_ID
|
|
string "App ID (required)"
|
|
default ""
|
|
help
|
|
Required app ID sent in Start directive payload.
|
|
|
|
config MULTIMODAL_VOICE_ID
|
|
string "Voice ID (optional)"
|
|
default ""
|
|
help
|
|
Optional voice ID for downstream TTS selection.
|
|
|
|
endif
|
|
|
|
config MULTIMODAL_DEVICE_TOKEN_URL
|
|
string "Device token URL"
|
|
default "https://gz.api.talkingq.com/token/api/device/token"
|
|
help
|
|
URL to request a temporary device token. Request body contains
|
|
deviceId / serialNumber in JSON.
|
|
|
|
config MULTIMODAL_WS_URI
|
|
string "WebSocket URI"
|
|
default "wss://dashscope.aliyuncs.com/api-ws/v1/inference"
|
|
help
|
|
WebSocket endpoint for multimodal inference.
|
|
|
|
config AUTH_V2_ENABLE
|
|
bool "Enable Auth V2 device-JWT challenge/response auth"
|
|
default y
|
|
help
|
|
When enabled, the device proves possession of an on-board P-256
|
|
key via a challenge/response signature against
|
|
AUTH_REGISTER_BASE_URL to mint a short-lived device JWT, which is
|
|
then used as the Authorization Bearer when requesting the
|
|
temporary multimodal token. Requires the device identity to be
|
|
registered server-side. Leave disabled to use the static API key
|
|
/ bypass path.
|
|
|
|
config AUTH_REGISTER_BASE_URL
|
|
string "Auth V2 registration base URL"
|
|
depends on AUTH_V2_ENABLE
|
|
default "https://gz.api.talkingq.com/register"
|
|
help
|
|
HTTPS base URL of the device registration / challenge-response
|
|
backend. The engine appends /api/auth/challenge,
|
|
/api/auth/response and /api/auth/rotate to this base.
|
|
|
|
config AUTH_CHALLENGE_PATH
|
|
string "Auth challenge path"
|
|
depends on AUTH_V2_ENABLE
|
|
default "/api/auth/challenge"
|
|
help
|
|
Path appended to AUTH_REGISTER_BASE_URL for the challenge request.
|
|
|
|
config AUTH_RESPONSE_PATH
|
|
string "Auth response path"
|
|
depends on AUTH_V2_ENABLE
|
|
default "/api/auth/response"
|
|
help
|
|
Path appended to AUTH_REGISTER_BASE_URL for the response request.
|
|
|
|
config AUTH_ROTATE_PATH
|
|
string "Auth rotate path"
|
|
depends on AUTH_V2_ENABLE
|
|
default "/api/auth/rotate"
|
|
help
|
|
Path appended to AUTH_REGISTER_BASE_URL for the key-rotate request.
|
|
|
|
config AUTH_HTTP_TIMEOUT_MS
|
|
int "Auth HTTP timeout in milliseconds"
|
|
depends on AUTH_V2_ENABLE
|
|
default 8000
|
|
help
|
|
Per-request timeout for device-auth HTTP calls.
|
|
|
|
config AUTH_JWT_REFRESH_MARGIN_SEC
|
|
int "Device JWT refresh margin in seconds"
|
|
depends on AUTH_V2_ENABLE
|
|
default 90
|
|
help
|
|
Refresh the device JWT this many seconds before expiry.
|
|
|
|
config AUTH_BACKOFF_BASE_MS
|
|
int "Auth retry backoff base in milliseconds"
|
|
depends on AUTH_V2_ENABLE
|
|
default 500
|
|
help
|
|
Base delay for exponential auth retry backoff.
|
|
|
|
config AUTH_BACKOFF_CAP_MS
|
|
int "Auth retry backoff cap in milliseconds"
|
|
depends on AUTH_V2_ENABLE
|
|
default 60000
|
|
help
|
|
Maximum delay for auth retry backoff.
|
|
|
|
config AUTH_BACKOFF_JITTER_MS
|
|
int "Auth retry backoff jitter in milliseconds"
|
|
depends on AUTH_V2_ENABLE
|
|
default 200
|
|
help
|
|
Random jitter added to each auth retry backoff.
|
|
|
|
config MULTIMODAL_UPSTREAM_MODE
|
|
string "Upstream mode for Start directive"
|
|
default "push2talk"
|
|
help
|
|
Fixed to push2talk. Other upstream modes are intentionally not
|
|
supported by this firmware runtime.
|
|
|
|
config MULTIMODAL_PTT_BUTTON_GPIO
|
|
int "Push-to-talk button GPIO"
|
|
default 15
|
|
range 0 48
|
|
help
|
|
GPIO used for the push-to-talk button.
|
|
Default from docs/gpio-map.md (function key K2 on GPIO15).
|
|
|
|
config MULTIMODAL_PTT_BUTTON_ACTIVE_LEVEL
|
|
int "Push-to-talk button active level"
|
|
default 0
|
|
range 0 1
|
|
help
|
|
Logic level that means the push-to-talk button is pressed.
|
|
Default from docs/gpio-map.md (function key K2 is active-low).
|
|
|
|
config MULTIMODAL_PTT_BUTTON_PULLUP
|
|
bool "Enable push-to-talk button pull-up"
|
|
default y
|
|
help
|
|
Enable the internal pull-up for the active-low push-to-talk button.
|
|
|
|
config MULTIMODAL_PTT_BUTTON_PULLDOWN
|
|
bool "Enable push-to-talk button pull-down"
|
|
default n
|
|
help
|
|
Leave disabled for the default active-low push-to-talk wiring.
|
|
|
|
config MULTIMODAL_HEARTBEAT_INTERVAL_MS
|
|
int "Heartbeat interval (ms)"
|
|
default 50000
|
|
range 1000 120000
|
|
help
|
|
Interval for HeartBeat directive to keep session alive.
|
|
|
|
config MULTIMODAL_NO_RESPONSE_TIMEOUT_MS
|
|
int "No downstream response timeout (ms)"
|
|
default 60000
|
|
range 1000 300000
|
|
help
|
|
Timeout without downstream frames before Stop(NoResponseTimeout).
|
|
|
|
config MULTIMODAL_DIALOG_IDLE_TIMEOUT_MS
|
|
int "Dialog idle timeout (ms)"
|
|
default 60000
|
|
range 1000 300000
|
|
help
|
|
Reserved idle timeout for higher-level dialog policy.
|
|
|
|
config MULTIMODAL_AUDIO_CHUNK_SIZE
|
|
int "Upstream audio chunk size (bytes)"
|
|
default 1920
|
|
range 256 8192
|
|
help
|
|
Upstream raw PCM bytes per local Opus frame before encoding.
|
|
For 16kHz/16-bit mono PCM with 60ms frames, use 1920 bytes.
|
|
|
|
config MULTIMODAL_OPUS_FRAME_DURATION_MS
|
|
int "Opus frame duration (ms)"
|
|
default 60
|
|
range 60 60
|
|
help
|
|
Fixed at 60 ms. The multimodal voice runtime uses 60 ms frames
|
|
end-to-end for both upstream and downstream raw-opus.
|
|
|
|
config MULTIMODAL_OPUS_BITRATE_KBPS
|
|
int "Opus bitrate (kbps)"
|
|
default 24
|
|
range 6 510
|
|
help
|
|
raw-opus bit_rate field in Start downstream/upstream codec target.
|
|
|
|
config MULTIMODAL_OPUS_COMPLEXITY
|
|
int "Opus encoder complexity"
|
|
default 0
|
|
range 0 10
|
|
help
|
|
Lower values reduce CPU and memory pressure.
|
|
|
|
config MULTIMODAL_OPUS_ENABLE_VBR
|
|
bool "Enable Opus VBR"
|
|
default n
|
|
|
|
config MULTIMODAL_OPUS_ENABLE_DTX
|
|
bool "Enable Opus DTX (uplink)"
|
|
default n
|
|
|
|
config MULTIMODAL_OPUS_ENABLE_FEC
|
|
bool "Enable Opus FEC (uplink)"
|
|
default n
|
|
|
|
config MULTIMODAL_OPUS_DEC_SELF_DELIMITED
|
|
bool "Enable self-delimited raw-opus decode"
|
|
default n
|
|
|
|
menu "Runtime ES8311 Audio Path"
|
|
|
|
config MULTIMODAL_AUDIO_ENABLE_CODEC_PATH
|
|
bool "Enable runtime ES8311 init/capture/playback"
|
|
default y
|
|
help
|
|
Enable ES8311 codec initialization at runtime and bind
|
|
microphone capture/downstream playback to multimodal WS.
|
|
|
|
config MULTIMODAL_AUDIO_CODEC_SAMPLE_RATE
|
|
int "Codec sample rate (Hz)"
|
|
default 16000
|
|
range 16000 16000
|
|
help
|
|
Fixed at 16000 Hz for mic capture, local Opus, Start
|
|
upstream sample_rate, Start downstream sample_rate, and
|
|
speaker playback.
|
|
|
|
config MULTIMODAL_AUDIO_CODEC_CHANNELS
|
|
int "Codec channels"
|
|
default 1
|
|
range 1 1
|
|
help
|
|
Fixed at 1 for the raw-opus 16kHz mono voice contract.
|
|
|
|
config MULTIMODAL_AUDIO_CODEC_BITS_PER_SAMPLE
|
|
int "Codec bits per sample"
|
|
default 16
|
|
range 16 32
|
|
help
|
|
PCM bit depth on codec I/O path.
|
|
|
|
config MULTIMODAL_AUDIO_CHANNEL_PROBE_ON_INIT
|
|
bool "Probe MIC/DAC-ref channel mapping during audio init"
|
|
default n
|
|
help
|
|
Legacy diagnostic option. Current project uses a fixed
|
|
ES8311 routing assumption: ch0 is microphone and ch1 is
|
|
DAC playback reference.
|
|
|
|
config MULTIMODAL_AUDIO_CHANNEL_PROBE_DURATION_MS
|
|
int "Channel probe duration (ms)"
|
|
default 800
|
|
range 200 3000
|
|
depends on MULTIMODAL_AUDIO_CHANNEL_PROBE_ON_INIT
|
|
help
|
|
Probe capture/playback duration used for MIC vs DAC-ref
|
|
correlation scoring.
|
|
|
|
config MULTIMODAL_AUDIO_OUT_VOLUME
|
|
int "Codec output volume (0-100)"
|
|
default 60
|
|
range 0 100
|
|
|
|
config MULTIMODAL_AUDIO_DOWNSTREAM_IDLE_MUTE_MS
|
|
int "Downstream idle output mute delay (ms)"
|
|
default 250
|
|
range 50 2000
|
|
help
|
|
Delay after the last downstream audio write before muting
|
|
the ES8311 output path. This keeps the PA control behavior
|
|
unchanged while suppressing idle speaker noise.
|
|
|
|
config MULTIMODAL_AUDIO_DOWNSTREAM_PLAYBACK_TASK_STACK
|
|
int "Downstream playback task stack (bytes)"
|
|
default 12288
|
|
range 8192 65536
|
|
help
|
|
Stack size for the task that decodes downstream Opus and
|
|
writes PCM to the codec. WebSocket binary workers only
|
|
enqueue packets to this task.
|
|
|
|
config MULTIMODAL_AUDIO_DOWNSTREAM_PLAYBACK_QUEUE_LEN
|
|
int "Downstream playback queue length"
|
|
default 1024
|
|
range 16 1024
|
|
help
|
|
Queue depth between the WebSocket binary worker and the
|
|
downstream audio playback task. The queue item itself is
|
|
small and packet payloads are allocated PSRAM-first, so the
|
|
default can absorb bursty TTS delivery while playback
|
|
drains at realtime PCM speed.
|
|
|
|
config MULTIMODAL_AUDIO_DOWNSTREAM_PLAYBACK_MAX_PACKET_BYTES
|
|
int "Downstream playback max Opus packet bytes"
|
|
default 2048
|
|
range 256 8192
|
|
help
|
|
Max raw Opus packet size accepted by the downstream
|
|
playback queue.
|
|
|
|
config MULTIMODAL_AUDIO_IN_GAIN_DB
|
|
int "Codec input gain (dB)"
|
|
default 30
|
|
range 0 42
|
|
|
|
config MULTIMODAL_AUDIO_MIC_CHANNEL
|
|
int "Microphone capture channel"
|
|
default 0
|
|
range 0 1
|
|
help
|
|
Interleaved ES8311 input channel that carries microphone
|
|
speech. Use 0 for the default left/first channel, or 1 if
|
|
level logs show speech energy on raw_ch1 instead of raw_ch0.
|
|
|
|
config MULTIMODAL_AUDIO_LOG_UPLINK_LEVELS
|
|
bool "Log microphone uplink audio levels"
|
|
default n
|
|
help
|
|
Log low-rate raw capture and uplink level statistics while
|
|
microphone uplink is active. This is useful for diagnosing
|
|
NoSpeechRecognized errors, muted capture, and swapped channels.
|
|
|
|
config MULTIMODAL_AUDIO_UPLINK_TASK_STACK
|
|
int "Mic uplink task stack (bytes)"
|
|
default 32768
|
|
range 16384 65536
|
|
help
|
|
Stack size for microphone capture/upload task.
|
|
|
|
config MULTIMODAL_AUDIO_UPLINK_SEND_TASK_STACK
|
|
int "Mic uplink send task stack (bytes)"
|
|
default 12288
|
|
range 8192 65536
|
|
help
|
|
Stack size for uplink send task that forwards Opus packets
|
|
to WebSocket transport.
|
|
|
|
config MULTIMODAL_AUDIO_UPLINK_SEND_QUEUE_LEN
|
|
int "Mic uplink send queue length"
|
|
default 24
|
|
range 2 48
|
|
help
|
|
Queue depth between capture/encode and WebSocket send task.
|
|
|
|
config MULTIMODAL_AUDIO_UPLINK_SEND_TIMEOUT_MS
|
|
int "Mic uplink queue send timeout (ms)"
|
|
default 5
|
|
range 0 20
|
|
help
|
|
Max time the capture task may block when the uplink queue
|
|
is full before it drops or replaces old packets. Lower
|
|
values keep microphone DMA service responsive under network
|
|
stalls and reduce end-to-end latency build-up.
|
|
|
|
config MULTIMODAL_AUDIO_UPLINK_MAX_PACKET_BYTES
|
|
int "Mic uplink max Opus packet bytes"
|
|
default 1024
|
|
range 160 2048
|
|
help
|
|
Max encoded 60 ms raw-opus packet size accepted by send queue.
|
|
|
|
config MULTIMODAL_AUDIO_INIT_RETRY_COUNT
|
|
int "Audio init retry count per trigger"
|
|
default 1
|
|
range 1 5
|
|
help
|
|
Keep this low under memory pressure to avoid fragmentation.
|
|
|
|
config MULTIMODAL_AUDIO_PREWARM_OPUS_BEFORE_WS
|
|
bool "Prewarm Opus runtime before WebSocket connect"
|
|
default y
|
|
help
|
|
Initializes Opus encoder/decoder before TLS/WebSocket tasks allocate
|
|
fragmented heap blocks, reducing `esp_opus_enc_open` alloc failures.
|
|
|
|
config MULTIMODAL_AUDIO_INIT_MIN_LARGEST_DMA
|
|
int "Skip audio init if largest DMA block below (bytes)"
|
|
default 4096
|
|
range 0 65536
|
|
help
|
|
Set 0 to disable this guard.
|
|
|
|
config MULTIMODAL_AUDIO_INIT_MIN_LARGEST_INTERNAL
|
|
int "Skip audio init if largest internal block below (bytes)"
|
|
default 6144
|
|
range 0 65536
|
|
help
|
|
Set 0 to disable this guard.
|
|
|
|
config MULTIMODAL_AUDIO_I2C_PORT
|
|
int "I2C port for ES8311 control"
|
|
range 0 1
|
|
default 0
|
|
|
|
config MULTIMODAL_AUDIO_I2C_SCL_GPIO
|
|
int "I2C SCL GPIO"
|
|
default 2
|
|
help
|
|
Default from docs/gpio-map.md (ES8311 control SCL on GPIO2).
|
|
|
|
config MULTIMODAL_AUDIO_I2C_SDA_GPIO
|
|
int "I2C SDA GPIO"
|
|
default 1
|
|
help
|
|
Default from docs/gpio-map.md (ES8311 control SDA on GPIO1).
|
|
|
|
config MULTIMODAL_AUDIO_I2C_ADDR
|
|
hex "ES8311 I2C address"
|
|
default 0x18
|
|
help
|
|
Accepts either 7-bit (0x18) or 8-bit (0x30) address formats.
|
|
|
|
config MULTIMODAL_AUDIO_I2S_PORT
|
|
int "I2S port for ES8311 data"
|
|
range 0 1
|
|
default 0
|
|
|
|
config MULTIMODAL_AUDIO_I2S_MCLK_GPIO
|
|
int "I2S MCLK GPIO"
|
|
default 38
|
|
help
|
|
Default from docs/gpio-map.md (I2S_MCLK on GPIO38).
|
|
|
|
config MULTIMODAL_AUDIO_I2S_BCLK_GPIO
|
|
int "I2S BCLK GPIO"
|
|
default 39
|
|
help
|
|
Default from docs/gpio-map.md (I2S_SCLK on GPIO39).
|
|
|
|
config MULTIMODAL_AUDIO_I2S_WS_GPIO
|
|
int "I2S WS GPIO"
|
|
default 41
|
|
help
|
|
Default from docs/gpio-map.md (I2S_LRCK on GPIO41).
|
|
|
|
config MULTIMODAL_AUDIO_I2S_DOUT_GPIO
|
|
int "I2S DOUT GPIO"
|
|
default 40
|
|
help
|
|
Default from docs/gpio-map.md (MCU output to ES8311 DSDIN on GPIO40).
|
|
|
|
config MULTIMODAL_AUDIO_I2S_DIN_GPIO
|
|
int "I2S DIN GPIO"
|
|
default 42
|
|
help
|
|
Default from docs/gpio-map.md (MCU input from ES8311 ASDOUT on GPIO42).
|
|
|
|
config MULTIMODAL_AUDIO_USE_MCLK
|
|
bool "Use external MCLK"
|
|
default y
|
|
|
|
config MULTIMODAL_AUDIO_PA_GPIO
|
|
int "PA enable GPIO (-1 to disable)"
|
|
default 12
|
|
help
|
|
Default from docs/gpio-map.md (PA_CTRL on IO12).
|
|
|
|
config MULTIMODAL_AUDIO_I2S_DMA_DESC_NUM
|
|
int "I2S DMA descriptor count"
|
|
default 4
|
|
range 2 8
|
|
help
|
|
Number of DMA descriptors per I2S direction. For the
|
|
default 16 kHz / 16-bit / stereo voice path, 4 descriptors
|
|
with 160 frames each provide about 40 ms of buffering,
|
|
which is a good compromise between Wi-Fi jitter tolerance
|
|
and RAM usage.
|
|
|
|
config MULTIMODAL_AUDIO_I2S_DMA_FRAME_NUM
|
|
int "I2S DMA frames per descriptor"
|
|
default 160
|
|
range 24 240
|
|
help
|
|
Frames stored in each DMA descriptor. With the default
|
|
16 kHz / stereo / 16-bit format, 160 frames is about 10 ms
|
|
per descriptor, which keeps I2S interrupt cadence moderate
|
|
while remaining responsive for voice capture.
|
|
|
|
config MULTIMODAL_AUDIO_TASK_CORE
|
|
int "Pin audio tasks to CPU core (-1 = no affinity)"
|
|
default 1
|
|
range -1 1
|
|
help
|
|
Pin audio capture, encode, decode and playback tasks to a
|
|
specific CPU core. On ESP32-S3, core 0 runs the WiFi/BT
|
|
protocol stack by default. Pinning audio to core 1 avoids
|
|
interference from network processing.
|
|
-1 = no affinity (scheduler decides)
|
|
0 = Core 0 (PRO_CPU)
|
|
1 = Core 1 (APP_CPU)
|
|
|
|
menu "Audio Debug Dump (UDP)"
|
|
depends on MULTIMODAL_AUDIO_ENABLE_CODEC_PATH
|
|
|
|
config MULTIMODAL_AUDIO_DEBUG_DUMP
|
|
bool "Enable audio debug dump over UDP"
|
|
default n
|
|
help
|
|
Stream microphone mono PCM and/or encoded Opus packets
|
|
over UDP to a PC for offline analysis.
|
|
Disabled by default; enable only for debugging.
|
|
|
|
config MULTIMODAL_AUDIO_DEBUG_DUMP_TARGET_IP
|
|
string "Target PC IP address"
|
|
default "192.168.1.100"
|
|
depends on MULTIMODAL_AUDIO_DEBUG_DUMP
|
|
help
|
|
IPv4 address of the PC receiving audio streams.
|
|
|
|
config MULTIMODAL_AUDIO_DEBUG_DUMP_PCM_PORT
|
|
int "UDP port for microphone mono PCM"
|
|
default 7200
|
|
range 1024 65535
|
|
depends on MULTIMODAL_AUDIO_DEBUG_DUMP
|
|
help
|
|
Port on which the PC listens for raw s16le PCM
|
|
at 16kHz mono (~32 KB/s).
|
|
|
|
config MULTIMODAL_AUDIO_DEBUG_DUMP_OPUS_ENABLE
|
|
bool "Also stream encoded Opus packets"
|
|
default n
|
|
depends on MULTIMODAL_AUDIO_DEBUG_DUMP
|
|
help
|
|
Additionally stream each Opus packet to a
|
|
separate UDP port for protocol-level debugging.
|
|
|
|
config MULTIMODAL_AUDIO_DEBUG_DUMP_OPUS_PORT
|
|
int "UDP port for Opus packets"
|
|
default 7201
|
|
range 1024 65535
|
|
depends on MULTIMODAL_AUDIO_DEBUG_DUMP_OPUS_ENABLE
|
|
help
|
|
Port on which the PC listens for raw Opus frames.
|
|
|
|
endmenu
|
|
|
|
endmenu
|
|
|
|
config MULTIMODAL_TTS_VOICE
|
|
string "Default downstream TTS voice"
|
|
default ""
|
|
help
|
|
Used when token/static credential does not provide voice ID.
|
|
|
|
config MULTIMODAL_TTS_SPEECH_RATE
|
|
int "Downstream TTS speech rate"
|
|
default 110
|
|
range 50 200
|
|
help
|
|
Speech rate percentage used in Start downstream parameters.
|
|
|
|
config MULTIMODAL_DOWNSTREAM_INTERMEDIATE_TEXT
|
|
string "Downstream intermediate text streams"
|
|
default "transcript,dialog"
|
|
help
|
|
Comma-separated intermediate_text value sent in Start
|
|
downstream parameters. The DashScope default is transcript
|
|
only; include dialog so RespondingContent carries assistant
|
|
response text and command metadata.
|
|
|
|
config MULTIMODAL_DOWNSTREAM_RATE_LIMIT
|
|
int "Downstream transmit rate limit (bytes/s)"
|
|
default 3000
|
|
range 0 200000
|
|
help
|
|
Optional downstream raw-opus transmit rate limit. The runtime
|
|
clamps non-zero values to the configured Opus bitrate budget,
|
|
and treats 0 as the same bitrate budget instead of omitting the
|
|
field, so server delivery stays close to realtime playback and
|
|
does not arrive as large TTS bursts followed by long gaps.
|
|
|
|
config MULTIMODAL_DOWNSTREAM_INCREMENTAL_RESPONSE
|
|
bool "Enable downstream incremental response"
|
|
default n
|
|
help
|
|
Request incremental model text chunks in the Start downstream
|
|
parameters. Audio downlink is still streamed through binary
|
|
WebSocket frames when this is disabled.
|
|
|
|
config MULTIMODAL_WEBSOCKET_TASK_STACK_BYTES
|
|
int "WebSocket task stack (bytes)"
|
|
default 32768
|
|
help
|
|
Stack size for the esp_websocket_client task.
|
|
|
|
config MULTIMODAL_WEBSOCKET_TASK_PRIORITY
|
|
int "WebSocket task priority"
|
|
default 8
|
|
range 5 12
|
|
help
|
|
Priority for the esp_websocket_client RX/TX task. Keep this
|
|
above local audio playback workers so downstream frames are
|
|
received even while PCM is being written to the codec.
|
|
|
|
config MULTIMODAL_WS_BUFFER_SIZE
|
|
int "WebSocket transport buffer size (bytes)"
|
|
default 2048
|
|
range 1024 8192
|
|
help
|
|
Rx/Tx buffer size used by esp_websocket_client. Larger value
|
|
reduces frame fragmentation at the cost of extra RAM.
|
|
|
|
config MULTIMODAL_WS_PING_INTERVAL_SEC
|
|
int "WebSocket transport ping interval (seconds)"
|
|
default 20
|
|
range 5 120
|
|
help
|
|
Interval for websocket ping/pong keepalive on transport layer.
|
|
This is independent from application HeartBeat directives.
|
|
|
|
config MULTIMODAL_WS_PINGPONG_TIMEOUT_SEC
|
|
int "WebSocket pong timeout (seconds)"
|
|
default 120
|
|
range 30 600
|
|
help
|
|
Disconnect transport if no pong is received within this period.
|
|
|
|
config MULTIMODAL_WS_ENABLE_TCP_KEEPALIVE
|
|
bool "Enable WebSocket TCP keepalive"
|
|
default y
|
|
help
|
|
Enable TCP keepalive probes on the websocket socket.
|
|
|
|
config MULTIMODAL_WS_TCP_KEEPALIVE_IDLE_SEC
|
|
int "TCP keepalive idle time (seconds)"
|
|
default 30
|
|
range 5 600
|
|
depends on MULTIMODAL_WS_ENABLE_TCP_KEEPALIVE
|
|
|
|
config MULTIMODAL_WS_TCP_KEEPALIVE_INTERVAL_SEC
|
|
int "TCP keepalive interval (seconds)"
|
|
default 10
|
|
range 1 120
|
|
depends on MULTIMODAL_WS_ENABLE_TCP_KEEPALIVE
|
|
|
|
config MULTIMODAL_WS_TCP_KEEPALIVE_COUNT
|
|
int "TCP keepalive retry count"
|
|
default 3
|
|
range 1 10
|
|
depends on MULTIMODAL_WS_ENABLE_TCP_KEEPALIVE
|
|
|
|
config MULTIMODAL_WS_REALTIME_LOCK_WAIT_MS
|
|
int "Realtime audio send lock wait (ms)"
|
|
default 80
|
|
range 1 1000
|
|
help
|
|
Max wait to acquire websocket send lock for realtime uplink.
|
|
|
|
config MULTIMODAL_WS_REALTIME_SEND_TIMEOUT_MS
|
|
int "Realtime audio websocket send timeout (ms)"
|
|
default 300
|
|
range 50 5000
|
|
help
|
|
Send timeout for each realtime binary uplink packet.
|
|
|
|
config MULTIMODAL_WS_DISPATCH_TASK_STACK_BYTES
|
|
int "WS ordered dispatch task stack (bytes)"
|
|
default 4096
|
|
range 4096 65536
|
|
help
|
|
Legacy minimum stack size for the ordered WS dispatch task.
|
|
The runtime uses the largest of dispatch, JSON, and Opus stack
|
|
settings because text events and binary audio frames share one
|
|
worker to preserve wire order.
|
|
|
|
config MULTIMODAL_WS_JSON_TASK_STACK_BYTES
|
|
int "WS JSON processing stack floor (bytes)"
|
|
default 8192
|
|
range 8192 65536
|
|
help
|
|
Stack floor for JSON event parsing/reassembly inside the
|
|
ordered WS worker.
|
|
|
|
config MULTIMODAL_WS_OPUS_TASK_STACK_BYTES
|
|
int "WS binary processing stack floor (bytes)"
|
|
default 12288
|
|
range 12288 65536
|
|
help
|
|
Stack floor for downstream binary raw-opus frame dispatch
|
|
inside the ordered WS worker. Local Opus decode/playback is
|
|
handled by the audio playback task.
|
|
|
|
config MULTIMODAL_WS_MSG_QUEUE_LEN
|
|
int "WS ingress queue length"
|
|
default 512
|
|
range 16 512
|
|
help
|
|
Queue depth for the ordered WS frame ingress. Text and binary
|
|
frames share this queue so protocol events and downstream audio
|
|
are dispatched in wire order.
|
|
|
|
config MULTIMODAL_RECONNECT_DELAY_MS
|
|
int "WebSocket reconnect delay (ms)"
|
|
default 2000
|
|
help
|
|
Delay between reconnect attempts if auto-reconnect is enabled.
|
|
|
|
config MULTIMODAL_WS_AUTO_START
|
|
bool "Send Start directive after connection"
|
|
default MULTIMODAL_AUTO_START_ON_WAKEUP
|
|
help
|
|
When enabled, send Start immediately after WebSocket is connected.
|
|
|
|
config MULTIMODAL_AUTO_START_ON_WAKEUP
|
|
bool "Auto send Start on wakeup/connect"
|
|
default n
|
|
help
|
|
Alias used by documentation. When enabled, Start is sent
|
|
automatically after WebSocket is connected.
|
|
|
|
endmenu
|
|
|
|
endmenu
|