添加mqtt相关对接协议逻辑，还差将设备上报数据保存数据库和音频数据上传云存储

talkingq-url/docs/mqtt协议_V1.3.txt

@@ -0,0 +1,190 @@
+device/TalkingQ_xxx/command    # 服务器下发命令（下行）
+device/TalkingQ_xxx/response   # 设备响应（上行）
+device/TalkingQ_xxx/event      # 设备主动事件
+device/TalkingQ_xxx/event_resp # 事件返回
+
+消息格式（JSON）
+device/TalkingQ_xxx/event 
+0.设备定时10分钟上报信息
+{
+  "msg_id": "000",
+   "data": {
+    "id":"TalkingQ_xxx",
+    "power": 70,              每个间隔10，从10-100
+	"signal": 3,              信号强度1是最弱的 5是最强
+	"voice":60,               每个间隔20，从40-100
+	"version":"v1.0"          
+  }
+}
+服务器返回
+device/TalkingQ_xxx/event_resp
+{
+	"msg_id": "000",
+	"status": "success"
+}
+
+1. GPS位置查询
+device/TalkingQ_xxx/command 
+服务器下发：
+{
+  "msg_id": "001"
+}
+
+
+device/TalkingQ_xxx/response
+4G模块响应：
+{
+  "msg_id": "001",
+  "status": "success",
+  "data": {
+    "latitude": 39.9042,
+    "longitude": 116.4074
+  }
+}
+
+
+2. 音量调节
+device/TalkingQ_xxx/command 
+服务器下发：
+{
+  "msg_id": "002",
+  "params": {
+    "level": 70
+  }
+}
+device/TalkingQ_xxx/response
+4G模块响应：
+{
+  "msg_id": "002",
+  "status": "success",
+  "data": {
+    "current_level": 70
+  }
+}
+
+3. OTA升级
+device/TalkingQ_xxx/command 
+服务器下发：
+{
+  "msg_id": "003",
+  "params": {
+    "url": "https://ota.example.com/firmware/v2.1.0.bin",
+    "version": "2.1.0"
+  }
+}
+
+
+device/TalkingQ_xxx/response
+4G模块响应（立即确认）：
+{
+  "msg_id": "003",
+  "status": "accepted",
+  "data": {
+    "current_version": "2.0.5",
+    "target_version": "2.1.0"
+  }
+}
+
+升级完成
+{
+	"msg_id": "003",
+    "status": "success",
+     "data": {
+    "new_version": "2.1.0"
+   }
+}
+
+4、NFC留言下发提示
+device/TalkingQ_xxx/command 
+如果设备在线，且有未读留言服务器定时10分钟下发一次：
+{
+  "msg_id": "004",
+  "params": {
+    "url": "http://xxx.mp3" //您有新的留言请注意查收
+  }
+}
+device/TalkingQ_xxx/response
+4G模块响应：
+{
+  "msg_id": "004",
+  "status": "success",
+}
+
+5、收听留言
+device/TalkingQ_xxx/event
+NFC触发，设备端上报
+{
+  "msg_id": "005",
+  "params": {
+    "uuid": "53C12B6DA20001"
+  }
+}
+
+6、NFC绑定uuid
+device/TalkingQ_xxx/command 
+{
+  "msg_id": "006",
+}
+device/TalkingQ_xxx/response
+4G模块响应：
+{
+  "msg_id": "006",
+  "status": "success",
+   "data": {
+    "uuid": "xxxx"
+   }
+}
+
+7、开关状态
+device/TalkingQ_xxx/command 
+{
+  "msg_id": "007",
+  "type": 0 ,          //0查询状态   1 控制打开和关闭
+  "status":0,          //只有type为1的时候生效， 0关闭  1 打开
+}
+device/TalkingQ_xxx/response
+4G模块响应：
+{
+  "msg_id": "007",
+  "status": "success",
+   "data": {
+    "status": "on"   //on或off 返回当前状态
+   }
+}
+
+
+//如果不是本机本地UUID，则下发“你好，你的朋友已在线请留言”
+//如果本机本地UUID但没有留言，"你好，已没可读留言"
+服务器下发
+device/TalkingQ_xxx/event_resp
+
+{
+  "msg_id": "005",
+  "status": "success",
+  "type": 0,  //0代表收听留言  1 代表需要发送留言
+  "params": {
+    "url_1": "http://xxx.mp3"
+	"url_2": "http://xxx.mp3"
+  }
+}
+
+{
+	"msg_id": "005",
+	"type": 0, 
+	"params": 
+	{
+		"url_1": "http://175.24.73.253:8080/assets/audio/no_message.mp3"
+	}
+ }
+
+TalkingQ_XQSN00001003   TQ_XQSN000000001003
+53C12B6DA20001 
+53D92B6DA20001 
+
+set id TalkingQ_XQSN00001003
+set sn TQ_XQSN000000001003
+
+TalkingQ_XQSN00001004   TQ_XQSN000000001004
+53E12B6DA20001  
+53D12B6DA20001  
+