feat: add local random timeout prompts

ql-application/threadx/interface/custom_app/audio.c

@@ -5,6 +5,7 @@
 #include "ql_iic.h"
 #include "ql_gpio.h"
 #include "app_inc.h"
+#include "audio_prompt.h"
 #include "ql_fs.h"
 
 #define DEFAULT_VOLUME  6
@@ -14,7 +15,6 @@
 u8 g_cur_volume = 0;
 u8 g_pre_volume = 0;
 
-extern const char *mp3_file[];
 extern int g_file_valid;
 
 

ql-application/threadx/interface/custom_app/http_downfile.c

@@ -14,7 +14,9 @@
 #include "sockets.h"
 #include "layer3.h"
 #include "ql_uart.h"
-const char *mp3_file[] ={
+#include "audio_prompt.h"
+
+const char *mp3_file[AUDIO_PROMPT_FILE_COUNT] ={
 	"test.mp3",// 0
 	"network_connect_zh.mp3",//1   系统启动中，正在等待网络连接 
 	"network_check.mp3",//2   网络不好 请检查网络
@@ -31,12 +33,19 @@ const char *mp3_file[] ={
 	"device_wake_up_zh.mp3",//13  设备已唤醒
 	"low_power_zh.mp3",//14  电量低
 	"low_power_off_zh.mp3",//15  电量严重不足，马上关机 
-	"volume_up_zh.mp3",//16  
-	"volume_down_zh.mp3",//17  
+	"volume_up_zh.mp3",//16
+	"volume_down_zh.mp3",//17
 	"ai_active_zh.mp3",//18
+	/* 19~24：对话响应超时随机提示音，文件名与资源服务器保持一致 */
+	"tts_error01.mp3",//19
+	"tts_error02.mp3",//20
+	"tts_error03.mp3",//21
+	"tts_error04.mp3",//22
+	"tts_error05.mp3",//23
+	"tts_error06.mp3",//24
 };
 
-//http://175.24.73.253/assets/roles/zhuli/zh/tts_error.mp3
+//http://banban.api.talkingq.com:8080/assets/roles/banban/tts_error.mp3
 
 //#define PCM_FILE  "http://47.113.99.138:7050/output_16k.pcm"
 
@@ -183,7 +192,8 @@ void app_file_check_download(void)
 	char filename_buff[64]={0x00};
 	int ret = 0, cnt = 0;
 	
-	for(index=1;index<19;index++){	
+	/* 遍历完整资源表，新增提示音不存在时会在联网后自动补下载 */
+	for(index=1;index<AUDIO_PROMPT_FILE_COUNT;index++){
 		
 		if(index==4||index==5||index==6||index==7||index==8){
 			continue;
@@ -194,7 +204,7 @@ void app_file_check_download(void)
 			if(ql_access(filename_buff, 0)!=0){
 				printf("downing mp3 file %d,%s\r\n", index,filename_buff);
 down_loop:
-				sprintf(url_buff, "http://101.35.224.118:8080/assets/roles/banban/%s", mp3_file[index]);
+				sprintf(url_buff, "http://banban.api.talkingq.com:8080/assets/roles/banban/%s", mp3_file[index]);
 				
 				ret = http_file_download(url_buff);
 				if(ret!=0&&cnt++<3)  goto down_loop;	
@@ -208,7 +218,7 @@ void app_file_check_del(void)
 	int index = 1;
 	char filename_buff[64]={0x00};
 	
-	for(index=1;index<19;index++){	
+	for(index=1;index<AUDIO_PROMPT_FILE_COUNT;index++){
 		
 		if(index==4||index==5||index==6||index==7||index==8){
 			continue;

ql-application/threadx/interface/custom_app/inc/audio_prompt.h

@@ -0,0 +1,19 @@
+#ifndef _AUDIO_PROMPT_H_
+#define _AUDIO_PROMPT_H_
+
+/*
+ * 本地提示音索引约定。
+ * 现有索引保持不变，新增的 6 条对话响应超时音频从 19 开始追加，
+ * 避免影响项目中已经使用的其他提示音索引。
+ */
+#define AUDIO_PROMPT_TTS_ERROR_INDEX          9
+#define AUDIO_PROMPT_TTS_ERROR_FIRST_INDEX   19
+#define AUDIO_PROMPT_TTS_ERROR_LAST_INDEX    24
+#define AUDIO_PROMPT_FILE_COUNT               25
+
+extern const char *mp3_file[AUDIO_PROMPT_FILE_COUNT];
+
+int app_play_tips_file(int index);
+int app_play_random_tts_error(void);
+
+#endif

ql-application/threadx/interface/custom_app/mqtt.c

@@ -391,11 +391,12 @@ int parse_event_response(const char *json_str, response_t *resp)
 
 
 /* [FIX] 安全处理 topic 名称，避免越界访问 */
-static void messageArrived(MessageData* data)
-{
-    int ret;
-    uint32 queue_count = 0;
-    app_work_item *work_item;
+static void messageArrived(MessageData* data)
+{
+    int ret;
+    int payload_log_len;
+    uint32 queue_count = 0;
+    app_work_item *work_item;
 
     // 安全获取 topic 字符串（复制到本地缓冲区）
     char topic_buf[128] = {0};
@@ -403,10 +404,16 @@ static void messageArrived(MessageData* data)
     if (topic_len >= sizeof(topic_buf)) {
         topic_len = sizeof(topic_buf) - 1;
     }
-    memcpy(topic_buf, data->topicName->lenstring.data, topic_len);
-    topic_buf[topic_len] = '\0';
-
-    // 比较 topic 类型
+    memcpy(topic_buf, data->topicName->lenstring.data, topic_len);
+    topic_buf[topic_len] = '\0';
+
+    payload_log_len = data->message->payloadlen > 512 ? 512 : (int)data->message->payloadlen;
+    printf("[MQTT-RX] topic=%s len=%d payload=%.*s%s\r\n",
+           topic_buf, (int)data->message->payloadlen, payload_log_len,
+           (const char *)data->message->payload,
+           data->message->payloadlen > (unsigned int)payload_log_len ? "..." : "");
+
+    // 比较 topic 类型
     int is_command = (strstr(topic_buf, "command") != NULL);
     int is_event_resp = (strstr(topic_buf, "event_resp") != NULL) || (strstr(topic_buf, imei_buf) != NULL);
 
@@ -618,15 +625,33 @@ sub_exit:
 //0:代表respone command     
 //1:代表send event
 /* [FIX] 将连接状态检查和发送放在同一锁保护区内，避免竞争 */
-int app_mqtt_publish(char *buf, int len, int type)
-{
-	static uint32_t mqtt_pub_cnt_err=0;
-	int rc = -1;
-	MQTTMessage message;
-	int cnt = 0;
-	static uint8_t publish_error = 0;
-
-	// 锁保护：检查连接状态并发送
+int app_mqtt_publish(char *buf, int len, int type)
+{
+    static uint32_t mqtt_pub_cnt_err=0;
+    int rc = -1;
+    int payload_log_len;
+    MQTTMessage message;
+    int cnt = 0;
+    static uint8_t publish_error = 0;
+    const char *publish_topic = NULL;
+
+    if (type == 0) {
+        publish_topic = respone_topicName;
+    } else if (type == 1) {
+        publish_topic = event_topicName;
+    } else if (type == 2) {
+        publish_topic = event_register;
+    } else {
+        RLOGE("invalid MQTT publish type=%d", type);
+        return -1;
+    }
+
+    payload_log_len = len > 512 ? 512 : len;
+    printf("[MQTT-TX] topic=%s len=%d payload=%.*s%s\r\n",
+           publish_topic, len, payload_log_len, buf,
+           len > payload_log_len ? "..." : "");
+
+    // 锁保护：检查连接状态并发送
 	int lock_ret = ql_rtos_mutex_lock(g_mqtt_public_mutex, 5000);
 	if (lock_ret != 0) {
 		RLOGE("MQTT mutex lock timeout");
@@ -643,18 +668,13 @@ int app_mqtt_publish(char *buf, int len, int type)
 	message.payload = buf;
 	message.payloadlen = len;
 
-	while (cnt++ < 3) {
-		u32 start = ql_rtos_get_systicks();
-		if (type == 0) {
-			rc = MQTTPublish(&client, respone_topicName, &message);
-		} else if (type == 1) {
-			rc = MQTTPublish(&client, event_topicName, &message);
-		} else if (type == 2) {
-			rc = MQTTPublish(&client, event_register, &message);
-		}
-
-		RLOGD("Pulish time:%d len: %d\n", (ql_rtos_get_systicks()-start)*5, len);
-		if (rc != 0) {
+    while (cnt++ < 3) {
+        u32 start = ql_rtos_get_systicks();
+        rc = MQTTPublish(&client, publish_topic, &message);
+
+        RLOGD("Pulish time:%d len: %d\n", (ql_rtos_get_systicks()-start)*5, len);
+        printf("[MQTT-TX] topic=%s attempt=%d rc=%d\r\n", publish_topic, cnt, rc);
+        if (rc != 0) {
 			mqtt_pub_cnt_err++;
 			mqtt_public_error = 1;
 			RLOGE("ERROR Return code from MQTT publish is %d, cnt %d", rc, mqtt_pub_cnt_err);
@@ -1250,23 +1270,34 @@ void handle_nfc_trigger(const char *uuid)
     free(json_str);
 }
 
-void handle_nfc_bind(const char *uuid)
-{
-    cJSON *root = cJSON_CreateObject();
-	cJSON *data = cJSON_CreateObject();
-    
-    cJSON_AddStringToObject(root, "msg_id", "006");
-    cJSON_AddStringToObject(root, "status", "success");
-
-	cJSON_AddStringToObject(data, "uuid", uuid);
-	cJSON_AddItemToObject(root, "data", data);
-    
-    char *json_str = cJSON_PrintUnformatted(root);
-    cJSON_Delete(root);
-		
-    app_mqtt_publish(json_str, strlen(json_str), 0);
-    free(json_str);
-}
+void handle_nfc_bind(const char *uuid)
+{
+	char iccid[QL_SIM_ICCID_LEN * 2 + 1] = {0};
+	QL_SIM_ERROR_CODE sim_ret;
+	cJSON *root = cJSON_CreateObject();
+	cJSON *data = cJSON_CreateObject();
+
+	cJSON_AddStringToObject(root, "msg_id", "006");
+	cJSON_AddStringToObject(root, "status", "success");
+
+	cJSON_AddStringToObject(data, "uuid", uuid);
+
+	sim_ret = ql_sim_get_iccid(iccid, sizeof(iccid));
+	if (sim_ret == QL_SIM_SUCCESS && iccid[0] != '\0') {
+		printf("NFC bind ICCID:%s\r\n", iccid);
+		cJSON_AddStringToObject(data, "iccid", iccid);
+	} else {
+		printf("NFC bind get ICCID failed, ret:%d\r\n", sim_ret);
+	}
+
+	cJSON_AddItemToObject(root, "data", data);
+
+	char *json_str = cJSON_PrintUnformatted(root);
+	cJSON_Delete(root);
+
+	app_mqtt_publish(json_str, strlen(json_str), 0);
+	free(json_str);
+}
 
 
 

ql-application/threadx/interface/custom_app/ws_talkingq.c

@@ -25,6 +25,7 @@
 #include "ql_uart.h"
 #include "hal_api.h"
 #include "fvad.h"
+#include "audio_prompt.h"
 
 
 
@@ -779,12 +780,16 @@ void sendRecordingAudioPacket(AudioPacket *packet) {
 }
 #endif
 
-extern const char *mp3_file[];
-
 int app_play_tips_file(int index)
 {
 	int file_valid_check = 0;
-	
+
+	/* 防止提示音索引越界访问文件名数组 */
+	if(index < 0 || index >= AUDIO_PROMPT_FILE_COUNT){
+		printf("invalid prompt index:%d\n", index);
+		return -3;
+	}
+
 	printf("xiaoice_play_index:%d\n", index);
 	
 		//正在录音过程中不允许播放
@@ -820,6 +825,48 @@ int app_play_tips_file(int index)
 	return 0;
 }
 
+/*
+ * 随机播放一条对话响应超时提示音。
+ * 只把 LittleFS 中实际存在的文件加入候选列表，新增音频尚未下载完成时，
+ * 仍可回退播放原来的 tts_error.mp3，不会随机到不存在的文件。
+ */
+int app_play_random_tts_error(void)
+{
+	static const int timeout_prompt_indices[] = {
+		AUDIO_PROMPT_TTS_ERROR_INDEX,
+		AUDIO_PROMPT_TTS_ERROR_FIRST_INDEX,
+		AUDIO_PROMPT_TTS_ERROR_FIRST_INDEX + 1,
+		AUDIO_PROMPT_TTS_ERROR_FIRST_INDEX + 2,
+		AUDIO_PROMPT_TTS_ERROR_FIRST_INDEX + 3,
+		AUDIO_PROMPT_TTS_ERROR_FIRST_INDEX + 4,
+		AUDIO_PROMPT_TTS_ERROR_LAST_INDEX
+	};
+	int valid_indices[sizeof(timeout_prompt_indices) / sizeof(timeout_prompt_indices[0])];
+	int valid_count = 0;
+	int selected_index;
+	int i;
+	char filename_buff[64] = {0x00};
+
+	for(i = 0; i < (int)(sizeof(timeout_prompt_indices) / sizeof(timeout_prompt_indices[0])); i++){
+		int prompt_index = timeout_prompt_indices[i];
+		sprintf(filename_buff, "U:/%s", mp3_file[prompt_index]);
+		if(ql_access(filename_buff, 0) == 0){	//检查filename_buff指向的文件是否存在
+			valid_indices[valid_count++] = prompt_index;
+		}
+	}
+
+	if(valid_count == 0){
+		printf("no local tts error prompt file\n");
+		return -2;
+	}
+
+	selected_index = valid_indices[hal_os_get_rand() % valid_count];
+	printf("random tts_error prompt index:%d, file:%s\n",
+		   selected_index, mp3_file[selected_index]);
+
+	return app_play_tips_file(selected_index);
+}
+
 void app_player_thread(void *arvg)
 {
  	ice_work_item *player_item=NULL; 	
@@ -1023,7 +1070,8 @@ static void check_connect_thread_entry(void *parameter)
 			printf("tts_error_set_speech1\n");
 			vad_set_speech_timeout_flag(1);
 			
-			app_play_tips_file(9);
+			/* 对话响应超时后，从本地已有的 7 条提示音中随机播放一条 */
+			app_play_random_tts_error();
 			//talkingq_ws_send_text("REQUEST_PROMPT_SOUND:tts_error");
 			//改为播放本地音频 听不清 请再说一遍
 		}