chenjintao/lucky-cat
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

增加了语音抽签控制屏幕显示

Browse Source 
增加了校准和财位控制电机旋转
This commit is contained in:
CSBOOK\44744
2026-07-01 15:07:59 +08:00
parent aab45b3ec5
commit 5d7c3f91d4
14 changed files with 467 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/TQ_Cat_examples.md
+1 -1
View File
@@ -20,7 +20,7 @@
## B. 抽签
1. **问：** 帮我抽个签
**答：** 签文：稳中求进。当下不用急着冲，像猫揣手手晒太阳一样，先把眼前小事做好，好时机自然来。
**答：** `/*{"抽签":"上上签"}*/`当下不用急着冲，像猫揣手手晒太阳一样，先把眼前小事做好，好时机自然来。
2. **问：** 我想求个签
**答：** 签文：小满即安。今天少跟人较劲，多夸自己两句，就像发现猫碗里多了条小鱼干，小小的快乐也值得开心。
docs/firmware-pin-usage.md
+2 -2
View File
@@ -12,6 +12,8 @@ is from the ESP32-S3 MCU perspective.
| 1 | `CONFIG_MULTIMODAL_AUDIO_I2C_SDA_GPIO` | Bidirectional | Audio codec | ES8311 I2C SDA | I2C port 0, codec control bus |
| 2 | `CONFIG_MULTIMODAL_AUDIO_I2C_SCL_GPIO` | Output | Audio codec | ES8311 I2C SCL | I2C port 0, codec control bus |
| 3 | `CONFIG_TQ_SCREEN_RESET_PIN` | Output | LCD | ST7789 panel reset | Set high after GPIO init; `-1` disables hardware reset |
| 4 | IO4 RMT control | Output | RMT control | RMT output control | Driven by platform IO effects RMT task |
| 5 | IO5 PWM control | Output | PWM control | PWM output control | Driven by platform IO effects pulse task |
| 6 | `CONFIG_TQ_SCREEN_SPI_CS_GPIO` | Output | LCD | ST7789 SPI chip select | SPI2 host |
| 7 | `CONFIG_TQ_SCREEN_DC_GPIO` | Output | LCD | ST7789 data/command select | Initialized low |
| 9 | `CONFIG_TQ_SCREEN_BACKLIGHT_GPIO` | Output | LCD | LCD backlight enable | Active-high by default |
@@ -73,8 +75,6 @@ them to an active project feature.
| GPIO / Net | Board function | Firmware status |
| --- | --- | --- |
| GPIO0 / K1 | Switch to GND, commonly boot/download related | Not consumed by application code |
| GPIO4 | Unassigned | Not used |
| GPIO5 | Unassigned | Not used |
| GPIO8 | Unassigned | Not used |
| GPIO10 / `SWING_PWM` | Swing coil control interface | No current firmware driver/config found |
| GPIO11 | Unassigned | Not used |
docs/gpio-map.md
+2 -2
View File
@@ -11,8 +11,8 @@ perspective.
| 1 | GND | GND | N/A | Ground reference | Ground reference |
| 2 | 3V3 | 3V3 | Power | 3.3 V supply rail | Power rail |
| 3 | EN/RST | EN | Input | Chip enable and reset input | Reset and enable |
| 4 | GPIO4 | UNASSIGNED | N/A | No connection assigned | Reserved; no signal assigned |
| 5 | GPIO5 | UNASSIGNED | N/A | No connection assigned | Reserved; no signal assigned |
| 4 | GPIO4 | IO4_RMT | Output | RMT control | RMT output control |
| 5 | GPIO5 | IO5_PWM | Output | PWM control | PWM output control |
| 6 | GPIO6 | ESP_IO6 | Output | Display interface CS | U9 |
| 7 | GPIO7 | ESP_IO7 | Output | Display interface A0 (RS) | U9 |
| 8 | GPIO15 | ESP_IO15 | Input | Function key K2 | 10 kOhm pull-up to 3V3; pulled to GND when pressed |