chenjintao/lucky-cat
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

refactor(config): organize project configuration menus

Browse Source
This commit is contained in:
chenjintao
2026-08-25 10:42:47 +08:00
parent 61f034b288
commit 63df9f91b3
2 changed files with 70 additions and 48 deletions
Download Patch File Download Diff File Expand all files Collapse all files
main/Kconfig.projbuild
+66 -44
View File
@@ -1,27 +1,31 @@
menu "Example Configuration"
menu "TQ Cat Configuration"
choice LCD_TYPE
prompt "LCD module type"
default LCD_TYPE_AUTO
help
The type of LCD on the evaluation board.
menu "Legacy LCD Driver Options"
config LCD_TYPE_AUTO
bool "Auto detect"
config LCD_TYPE_ST7789V
bool "ST7789V (WROVER Kit v2 or v3)"
config LCD_TYPE_ILI9341
bool "ILI9341 (WROVER Kit v1 or DevKitJ v1)"
endchoice
choice LCD_TYPE
prompt "LCD module type"
default LCD_TYPE_AUTO
help
The type of LCD on the evaluation board.
config LCD_OVERCLOCK
bool
prompt "Run LCD at higher clock speed than allowed"
default "n"
help
The ILI9341 and ST7789 specify that the maximum clock speed for the SPI interface is 10MHz. However,
in practice the driver chips work fine with a higher clock rate, and using that gives a better framerate.
Select this to try using the out-of-spec clock rate.
config LCD_TYPE_AUTO
bool "Auto detect"
config LCD_TYPE_ST7789V
bool "ST7789V (WROVER Kit v2 or v3)"
config LCD_TYPE_ILI9341
bool "ILI9341 (WROVER Kit v1 or DevKitJ v1)"
endchoice
config LCD_OVERCLOCK
bool
prompt "Run LCD at higher clock speed than allowed"
default "n"
help
The ILI9341 and ST7789 specify that the maximum clock speed for the SPI interface is 10MHz. However,
in practice the driver chips work fine with a higher clock rate, and using that gives a better framerate.
Select this to try using the out-of-spec clock rate.
endmenu
menu "Wi-Fi Stability"
@@ -57,6 +61,8 @@ menu "Example Configuration"
POSIX TZ string used for local wall-clock display and daily
scheduling. For China Standard Time use "CST-8".
endmenu
menu "OTA Firmware Update"
config TQ_OTA_ENABLE
@@ -152,8 +158,6 @@ menu "Example Configuration"
endmenu
endmenu
menu "Mini Program Wi-Fi Provisioning"
config TQ_MINI_PROGRAM_PROVISIONING_ENABLE
@@ -340,7 +344,9 @@ menu "Example Configuration"
help
Stack size in bytes for the control-plane system event task.
menu "Light Standby"
endmenu
menu "Power Saving & Light Standby"
config TQ_LIGHT_STANDBY_ENABLE
bool "Enable light-standby state coordinator"
@@ -460,7 +466,7 @@ menu "Example Configuration"
endmenu
menu "Remote Logging"
menu "Remote Logging"
config TQ_REMOTE_LOG_ENABLE
bool "Enable remote log upload"
@@ -542,6 +548,8 @@ menu "Example Configuration"
endmenu
menu "Buttons & Input"
config TQ_KEY_INPUT_ENABLE
bool "Enable interrupt-driven key input task"
default y
@@ -688,7 +696,7 @@ menu "Example Configuration"
endmenu
menu "TQ Screen"
menu "Display & Screen"
config TQ_SCREEN_ENABLE
bool "Enable LCD screen runtime"
@@ -826,16 +834,14 @@ menu "Example Configuration"
endmenu
menu "TQ Slot Machine"
menu "Slot Machine"
config TQ_SLOT_SWITCH_GPIO
int "Slot feature switch GPIO"
default 6
default 13
range 0 48
help
GPIO used for the rocker microswitch that triggers the slot
machine feature. The new board reuses the unconnected TP_SCL
contact on IO6 for the original SW2 function.
GPIO used by the input that triggers the slot machine feature.
config TQ_SLOT_SWITCH_ACTIVE_LEVEL
int "Slot feature switch active level"
@@ -843,7 +849,6 @@ menu "Example Configuration"
range 0 1
help
Logic level that means the slot machine feature switch is active.
The rocker microswitch shorts IO6 to ground when pressed.
config TQ_SLOT_SWITCH_PULLUP
bool "Enable slot feature switch pull-up"
@@ -866,7 +871,7 @@ menu "Example Configuration"
endmenu
menu "TQ Calibration"
menu "Motor & Calibration"
config TQ_STEPPER_ENABLE
bool "Enable turntable stepper driver"
@@ -939,7 +944,7 @@ menu "Example Configuration"
endmenu
menu "TQ Power"
menu "Power & Battery"
config TQ_POWER_HOLD_GPIO
int "Power hold GPIO (-1 to disable)"
@@ -1097,7 +1102,7 @@ menu "Example Configuration"
endmenu
menu "Wi-Fi Provisioning"
menu "Network Identity & Wi-Fi Provisioning"
config MULTIMODAL_WIFI_SSID
string "Seed Wi-Fi SSID"
@@ -1170,7 +1175,7 @@ menu "Example Configuration"
endmenu
menu "Daily Fortune"
menu "Daily Fortune & User Configuration"
config FORTUNE_ENABLE
bool "Enable device-side daily fortune refresh"
@@ -1228,7 +1233,7 @@ menu "Example Configuration"
endmenu
menu "WebSocket / Multimodal"
menu "Voice, Authentication & Multimodal"
config ENABLE_MULTIMODAL_INTERACTION
bool "Enable multimodal interaction module"
@@ -1244,6 +1249,8 @@ menu "Example Configuration"
help
Stack size in bytes for the multimodal session watchdog task.
menu "Credentials & Device Authentication"
config MULTIMODAL_USE_STATIC_CREDENTIALS
bool "Use static WebSocket credentials (skip token request)"
default n
@@ -1393,6 +1400,10 @@ menu "Example Configuration"
help
Random jitter added to each auth retry backoff.
endmenu
menu "Interaction & Local Wake"
config MULTIMODAL_UPSTREAM_MODE
string "Upstream mode for Start directive"
default "push2talk"
@@ -1402,11 +1413,10 @@ menu "Example Configuration"
config MULTIMODAL_PTT_BUTTON_GPIO
int "Push-to-talk button GPIO"
default 13
default 3
range 0 48
help
GPIO used for the push-to-talk button.
Default from docs/gpio-map.md (Button 2 on the SW2/IO13 net).
config MULTIMODAL_PTT_BUTTON_ACTIVE_LEVEL
int "Push-to-talk button active level"
@@ -1414,20 +1424,18 @@ menu "Example Configuration"
range 0 1
help
Logic level that means the push-to-talk button is pressed.
Button 2 is active-low through the board pull-up.
config MULTIMODAL_PTT_BUTTON_PULLUP
bool "Enable push-to-talk button pull-up"
default y
help
Enable the internal pull-up for the default active-low Button 2
wiring in addition to the board pull-up.
Enable the internal pull-up when required by the button wiring.
config MULTIMODAL_PTT_BUTTON_PULLDOWN
bool "Enable push-to-talk button pull-down"
default n
help
Leave disabled for the default active-low Button 2 wiring.
Enable the internal pull-down when required by the button wiring.
config TQ_LOCAL_WAKE_ENABLE
bool "Enable local wake-word listener"
@@ -1530,6 +1538,10 @@ menu "Example Configuration"
help
Initial threshold is 0.12 and must be tuned with device audio.
endmenu
menu "Session & Opus Codec"
config MULTIMODAL_HEARTBEAT_INTERVAL_MS
int "Heartbeat interval (ms)"
default 50000
@@ -1597,7 +1609,9 @@ menu "Example Configuration"
bool "Enable self-delimited raw-opus decode"
default n
menu "Runtime ES8311 Audio Path"
endmenu
menu "Audio Codec & Streaming"
config MULTIMODAL_AUDIO_ENABLE_CODEC_PATH
bool "Enable runtime ES8311 init/capture/playback"
@@ -1991,6 +2005,8 @@ menu "Example Configuration"
endmenu
menu "Downstream TTS"
config MULTIMODAL_TTS_VOICE
string "Default downstream TTS voice"
default ""
@@ -2032,6 +2048,10 @@ menu "Example Configuration"
parameters. Audio downlink is still streamed through binary
WebSocket frames when this is disabled.
endmenu
menu "WebSocket Transport"
config MULTIMODAL_WEBSOCKET_TASK_STACK_BYTES
int "WebSocket task stack (bytes)"
default 32768
@@ -2150,6 +2170,8 @@ menu "Example Configuration"
help
Delay between reconnect attempts if auto-reconnect is enabled.
endmenu
endmenu
endmenu
sdkconfig.defaults
+4 -4
View File
@@ -182,8 +182,8 @@ CONFIG_MULTIMODAL_DEVICE_ID=""
CONFIG_MULTIMODAL_SERIAL_NUMBER=""
CONFIG_MULTIMODAL_WIFI_SSID=""
CONFIG_MULTIMODAL_WIFI_PASSWORD=""
CONFIG_ESPTOOLPY_MONITOR_BAUD=921600
CONFIG_ESP_CONSOLE_UART_BAUDRATE=921600
CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
CONFIG_MULTIMODAL_DEVICE_TOKEN_URL="https://gz.api.talkingq.com/token/api/device/token"
CONFIG_FORTUNE_ENABLE=y
CONFIG_FORTUNE_API_URL="https://gz.api.talkingq.com/token/api/device/fortune/daily-wealth"
@@ -200,7 +200,7 @@ CONFIG_AUTH_V2_ENABLE=y
CONFIG_TQ_FACTORY_CLI_ENABLE=y
CONFIG_TQ_FACTORY_CLI_TASK_STACK_BYTES=10240
CONFIG_MULTIMODAL_UPSTREAM_MODE="push2talk"
CONFIG_MULTIMODAL_PTT_BUTTON_GPIO=13
CONFIG_MULTIMODAL_PTT_BUTTON_GPIO=3
CONFIG_MULTIMODAL_PTT_BUTTON_ACTIVE_LEVEL=0
CONFIG_MULTIMODAL_PTT_BUTTON_PULLUP=y
# CONFIG_MULTIMODAL_PTT_BUTTON_PULLDOWN is not set
@@ -311,7 +311,7 @@ CONFIG_TQ_SCREEN_SPI_CS_GPIO=15
CONFIG_TQ_SCREEN_DC_GPIO=16
CONFIG_TQ_SCREEN_BACKLIGHT_GPIO=7
CONFIG_TQ_SCREEN_SPI_PIXEL_CLOCK_HZ=20000000
CONFIG_TQ_SLOT_SWITCH_GPIO=6
CONFIG_TQ_SLOT_SWITCH_GPIO=13
CONFIG_TQ_SLOT_SWITCH_ACTIVE_LEVEL=0
CONFIG_TQ_SLOT_SWITCH_PULLUP=y
# CONFIG_TQ_SLOT_SWITCH_PULLDOWN is not set